Jump to content
Sonic Electronix

Recommended Posts

Posted
How new is the sub? Like Brand new, becuase AQ sent a note with my buddies saying not to play 20-39 hz at all untill the sub had about 10-12 hours of play time aka broken in. It said you would have a suspension problem if you didnt follow those intructions...

So how old is the sub?

Used sub.

Posted
Used sub.

Is it the new HDC3 or the older HD3??

1998 Ford Explorer Eddie Bauer... New setup, old ride... QX56 is staying stock til I get loud... It's only getting walled off if I don't meet my goal @ SBN.

Pioneer AVIC-N2

(12) 12" RE SXs old model.... (3) AB VFL 500.1 @ 1ohm each

Dual 300amp Ohio Gen alts.... (10) Northstar NSB-125s

26ft3 @ 33hz w/ a ton of port area

156.5 @ 40hz @ dash, Db Drag style / 153.2 Bassrace

Posted

What are the enclosure specs?? and how much power were u running?? I've run HD3s in the past and have done damn near everything to blow one with no success. A single 15 has seen over 4kw bassrace sessions and 8kw burps many many times without a recone. It's in my friend's car still to this day running just fine.

1998 Ford Explorer Eddie Bauer... New setup, old ride... QX56 is staying stock til I get loud... It's only getting walled off if I don't meet my goal @ SBN.

Pioneer AVIC-N2

(12) 12" RE SXs old model.... (3) AB VFL 500.1 @ 1ohm each

Dual 300amp Ohio Gen alts.... (10) Northstar NSB-125s

26ft3 @ 33hz w/ a ton of port area

156.5 @ 40hz @ dash, Db Drag style / 153.2 Bassrace

Posted
What are the enclosure specs?? and how much power were u running?? I've run HD3s in the past and have done damn near everything to blow one with no success. A single 15 has seen over 4kw bassrace sessions and 8kw burps many many times without a recone. It's in my friend's car still to this day running just fine.

I had in about 3.5 - 3.8 cubes after displacement tuned to 32 hz.. or close to there. :D I mean, it plays fine at high volume and all but shitty at low. And its very stiff. I push on the dustcap and it barely moves back up. It sounds like something is grinding/rubbing against where the coils are.

Posted
I had in about 3.5 - 3.8 cubes after displacement tuned to 32 hz.. or close to there. :D I mean, it plays fine at high volume and all but shitty at low. And its very stiff. I push on the dustcap and it barely moves back up. It sounds like something is grinding/rubbing against where the coils are.

Been there done that. Good ole fashion coil rub. Recone time.

1. Order Kit

2. Receive Kit and give UPS guy a high five.

3. Get some beer and bring a few buddies over. 1 that can video

4. Find a electrical socket and have some fun.

4a. Or if you really want to see some action get a hold of the biggest damn amp you can borrow and have a disco party at full blast. (just add chicks)

5. Drink too much and puke in your neighbors trash can.

Live the dream baby...You will be shitting your pants again before you know it.

Posted (edited)
Been there done that. Good ole fashion coil rub. Recone time.

1. Order Kit

2. Receive Kit and give UPS guy a high five.

3. Get some beer and bring a few buddies over. 1 that can video

4. Find a electrical socket and have some fun.

4a. Or if you really want to see some action get a hold of the biggest damn amp you can borrow and have a disco party at full blast. (just add chicks)

5. Drink too much and puke in your neighbors trash can.

:lol::rofl:

Edited by ktownsdriftking

Too many projects, too little time...

Posted
Been there done that. Good ole fashion coil rub. Recone time.

1. Order Kit

2. Receive Kit and give UPS guy a high five.

3. Get some beer and bring a few buddies over. 1 that can video

4. Find a electrical socket and have some fun.

4a. Or if you really want to see some action get a hold of the biggest damn amp you can borrow and have a disco party at full blast. (just add chicks)

5. Drink too much and puke in your neighbors trash can.

:friends:

Recone the AQ or recone the lvl 4 is my next question.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   1 Member, 0 Anonymous, 658 Guests (See full list)

×
×
  • Create New...