kwgreer Posted December 17, 2009 Report Share Posted December 17, 2009 Listen, I'm just trying to get clarifications on a lot of things.I see a whole lot of speculation going on, and a lot of people talking about this thing like it's the greatest thing ever invented. I'm a little more skeptical. Pardon me for asking some real questions. You know how easy a clamp test would be. You probably have that sub set up in your garage right now. Throw a clamp meter around the positive speaker wire, DMM in the terminals. Would take all of 15 seconds and would only prove your claims. Call me impatient if you must. why do you care so much? If you don't like this sub or DC audio then don't run it. I don't personally run DC but think it is great to see them trying something different instead of ordering basic parts and glueing them together like 95% of the "non mainstream" manufacturers do. I hope you guys have a great success with this new material Rusty/Clay. Link to comment Share on other sites More sharing options...
The A Team Posted December 17, 2009 Report Share Posted December 17, 2009 I have been trying to defend against your opinion on this idea, and seems DC in general. You came into this thread in attempt to prove this idea wrong, so i think you have that part backwards. All we are doing here is giving people a sneak peak. You will see clamped power tests along with SPL gains/ losses in due time. Just sit back and enjoy for the time being. Listen, I'm just trying to get clarifications on a lot of things.I see a whole lot of speculation going on, and a lot of people talking about this thing like it's the greatest thing ever invented. I'm a little more skeptical. Pardon me for asking some real questions. You know how easy a clamp test would be. You probably have that sub set up in your garage right now. Throw a clamp meter around the positive speaker wire, DMM in the terminals. Would take all of 15 seconds and would only prove your claims. Call me impatient if you must. Man you are like the energizer bunny of pain in the ass. lol This vid was to show the cone strength and the sub in motion, it did just that. We will test clamped power and spl soon, so refer to the large letters above please. The people who are liking what they see must trust that we can make this work and thats great. We need people who are behind us and wish to have this option when its available otherwise there is no reason to do it if it wont sell. Lets look at a business perspective here. Then we have you.... You are skeptical ok we have established that im pretty sure at this point. Every other post doesnt have to be you saying it wont work or asking for detailed autocad drawings of what we are doing so that you can approve or not. So lets stop the broken record bull shit here and lets all wait to see how it turns out. Thats not asking to much. Link to comment Share on other sites More sharing options...
tommyk90 Posted December 17, 2009 Report Share Posted December 17, 2009 (edited) why do you care so much? If you don't like this sub or DC audio then don't run it. I don't personally run DC but think it is great to see them trying something different instead of ordering basic parts and glueing them together like 95% of the "non mainstream" manufacturers do. I hope you guys have a great success with this new material Rusty/Clay. I care because I don't like rumors and hype floating around the forums. I've seen bad things happen because of it. Which is why I said most companies would thoroughly test something, THEN release it to the public. How many people a day do you think email Fi asking about the SMD sub? That, IMO, has come back to bite them in the ass. Remember Mass Destruction subs? No? Haha. The T3 TSNS that JD posted a while back? A lot of people have stated that it was a fake sub. All these things don't help a companies image, IMO. Edited December 17, 2009 by tommyk90 Team B2, Team Audiotechnix, Team Kicker, Team XS Power, Team Sundown, Team Maxxsonics, Team DD2008 Bassrace 130-139.9 Regional and National Champion2006, 2007, 2009, 2010 and 2012 MECA Champion (S1, SR1, S2, S3, S4, DB1) -1 DD 9510F + 2 Sundown SAZ2500's @ .7 ohm strapped=154.2 headrest, 129.2 driveby-2 DD 9510F's + 2 Sundown SAZ2500's @ 1 ohm strapped=154.0 headrest-1 DD 9512F + 2 Sundown SAZ2500's @ 1 ohm strapped=153.5 headrest, 131.1 Driveby -2 DD 9512F + 2 B2 Zero1's @ .5 strapped= 157.0 headrest, 158.0 outlaw-1 Sundown SA-8 + 2 MB Quart 2000's=148.8 headrest, 150.6 outlaw Link to comment Share on other sites More sharing options...
tommyk90 Posted December 17, 2009 Report Share Posted December 17, 2009 Man you are like the energizer bunny of pain in the ass. lol This vid was to show the cone strength and the sub in motion, it did just that. We will test clamped power and spl soon, so refer to the large letters above please. The people who are liking what they see must trust that we can make this work and thats great. We need people who are behind us and wish to have this option when its available otherwise there is no reason to do it if it wont sell. Lets look at a business perspective here. Then we have you.... You are skeptical ok we have established that im pretty sure at this point. Every other post doesnt have to be you saying it wont work or asking for detailed autocad drawings of what we are doing so that you can approve or not. So lets stop the broken record bull shit here and lets all wait to see how it turns out. Thats not asking to much. Yeah, like I said, I'm impatient. You guys have obviously done quite a bit of testing already, I just wanted more. That's all. Detailed autocad's? No, not really. Hell, in the beginning all I wanted was a former to cone picture, because that was my area of main concern. It escalated from there when I was met with hostility, though I'll admit that I didn't help that situation. For now, I'll sit back and try to remain patient. Team B2, Team Audiotechnix, Team Kicker, Team XS Power, Team Sundown, Team Maxxsonics, Team DD2008 Bassrace 130-139.9 Regional and National Champion2006, 2007, 2009, 2010 and 2012 MECA Champion (S1, SR1, S2, S3, S4, DB1) -1 DD 9510F + 2 Sundown SAZ2500's @ .7 ohm strapped=154.2 headrest, 129.2 driveby-2 DD 9510F's + 2 Sundown SAZ2500's @ 1 ohm strapped=154.0 headrest-1 DD 9512F + 2 Sundown SAZ2500's @ 1 ohm strapped=153.5 headrest, 131.1 Driveby -2 DD 9512F + 2 B2 Zero1's @ .5 strapped= 157.0 headrest, 158.0 outlaw-1 Sundown SA-8 + 2 MB Quart 2000's=148.8 headrest, 150.6 outlaw Link to comment Share on other sites More sharing options...
kwgreer Posted December 17, 2009 Report Share Posted December 17, 2009 I care because I don't like rumors and hype floating around the forums. I've seen bad things happen because of it. Which is why I said most companies would thoroughly test something, THEN release it to the public. How many people a day do you think email Fi asking about the SMD sub? That, IMO, has come back to bite them in the ass. Remember Mass Destruction subs? No? Haha. The T3 TSNS that JD posted a while back? A lot of people have stated that it was a fake sub. All these things don't help a companies image, IMO. We'll I am thankful that we have the internet police patrolling this thread, no one would want to break the rules of car audio forums would they? I don't see why anyone at DC audio would care if people think this is a fake sub? Clay already competed at a show with this sub by the way. Link to comment Share on other sites More sharing options...
The A Team Posted December 17, 2009 Report Share Posted December 17, 2009 I care because I don't like rumors and hype floating around the forums. I've seen bad things happen because of it. Which is why I said most companies would thoroughly test something, THEN release it to the public. How many people a day do you think email Fi asking about the SMD sub? That, IMO, has come back to bite them in the ass. Remember Mass Destruction subs? No? Haha. The T3 TSNS that JD posted a while back? A lot of people have stated that it was a fake sub. All these things don't help a companies image, IMO. Its alittle late for that now isnt it. You have made your point move on. Link to comment Share on other sites More sharing options...
tommyk90 Posted December 17, 2009 Report Share Posted December 17, 2009 We'll I am thankful that we have the internet police patrolling this thread, no one would want to break the rules of car audio forums would they? I don't see why anyone at DC audio would care if people think this is a fake sub? Clay already competed at a show with this sub by the way. Did I say it was a fake sub? No, I did not. What I was saying is it's not always a good idea for a company to release information on a product before it's out of the prototype stage (aka, the SMD sub). Because if it doesn't work out for whatever reason, people will be left wondering why. Team B2, Team Audiotechnix, Team Kicker, Team XS Power, Team Sundown, Team Maxxsonics, Team DD2008 Bassrace 130-139.9 Regional and National Champion2006, 2007, 2009, 2010 and 2012 MECA Champion (S1, SR1, S2, S3, S4, DB1) -1 DD 9510F + 2 Sundown SAZ2500's @ .7 ohm strapped=154.2 headrest, 129.2 driveby-2 DD 9510F's + 2 Sundown SAZ2500's @ 1 ohm strapped=154.0 headrest-1 DD 9512F + 2 Sundown SAZ2500's @ 1 ohm strapped=153.5 headrest, 131.1 Driveby -2 DD 9512F + 2 B2 Zero1's @ .5 strapped= 157.0 headrest, 158.0 outlaw-1 Sundown SA-8 + 2 MB Quart 2000's=148.8 headrest, 150.6 outlaw Link to comment Share on other sites More sharing options...
Dr. Johnson Posted December 17, 2009 Report Share Posted December 17, 2009 Ohh he is a public image specialist that is working pro bono . lol Link to comment Share on other sites More sharing options...
tommyk90 Posted December 17, 2009 Report Share Posted December 17, 2009 Its alittle late for that now isnt it. You have made your point move on. A little late for what? I posted something very similar to my above post days ago, before everyone else started jumping on me. I'm trying to defend myself just like you. Team B2, Team Audiotechnix, Team Kicker, Team XS Power, Team Sundown, Team Maxxsonics, Team DD2008 Bassrace 130-139.9 Regional and National Champion2006, 2007, 2009, 2010 and 2012 MECA Champion (S1, SR1, S2, S3, S4, DB1) -1 DD 9510F + 2 Sundown SAZ2500's @ .7 ohm strapped=154.2 headrest, 129.2 driveby-2 DD 9510F's + 2 Sundown SAZ2500's @ 1 ohm strapped=154.0 headrest-1 DD 9512F + 2 Sundown SAZ2500's @ 1 ohm strapped=153.5 headrest, 131.1 Driveby -2 DD 9512F + 2 B2 Zero1's @ .5 strapped= 157.0 headrest, 158.0 outlaw-1 Sundown SA-8 + 2 MB Quart 2000's=148.8 headrest, 150.6 outlaw Link to comment Share on other sites More sharing options...
tommyk90 Posted December 17, 2009 Report Share Posted December 17, 2009 Ohh he is a public image specialist that is working pro boner . lol Fixed. Team B2, Team Audiotechnix, Team Kicker, Team XS Power, Team Sundown, Team Maxxsonics, Team DD2008 Bassrace 130-139.9 Regional and National Champion2006, 2007, 2009, 2010 and 2012 MECA Champion (S1, SR1, S2, S3, S4, DB1) -1 DD 9510F + 2 Sundown SAZ2500's @ .7 ohm strapped=154.2 headrest, 129.2 driveby-2 DD 9510F's + 2 Sundown SAZ2500's @ 1 ohm strapped=154.0 headrest-1 DD 9512F + 2 Sundown SAZ2500's @ 1 ohm strapped=153.5 headrest, 131.1 Driveby -2 DD 9512F + 2 B2 Zero1's @ .5 strapped= 157.0 headrest, 158.0 outlaw-1 Sundown SA-8 + 2 MB Quart 2000's=148.8 headrest, 150.6 outlaw Link to comment Share on other sites More sharing options...
Recommended Posts