lookin for install pics in a durango

[cartunez2004]

ok i have a 00 durango r/t its my daily driver but im gonna get rid of the third row seat and put my 4 15'' soundstream t4s in there since theres plenty of room , i wanna get some ideas of where people put there amps and batterys ect..

[iTech]

ok i have a 00 durango r/t its my daily driver but im gonna get rid of the third row seat and put my 4 15'' soundstream t4s in there since theres plenty of room , i wanna get some ideas of where people put there amps and batterys ect..

Dude, I'm not tryin to be an as$hole but if you go to Member Builds and search Durango, about 5 or 6 different builds with "Durango" in the title of the thread show up in the 1st page, One of those being Chodes'

Edited December 9, 2009 by tech2332

[99vic]

i had a duranghoe.. if you remove the back seat you can put batteries in that drop down area on the bottom .and build a dummy floor over them to make it flat and line it up with the 2nd row seats. you can kind of see here

here is what was under the false floor as you can see there is plenty more room

or you can do it like this with the amp on the other side i could fit 2 batteries there we later built a caver bit cant find the finished pic

here is the other side where i had the amps

Edited December 9, 2009 by 99vic

[keepinitloud]

this is freaky my friends shop did a durango with 4 soundstream t5 12's I can get you some pictures if yur enterested its in a clamshell uses to soundstream 2000 watt amps

[cartunez2004]

Dude, I'm not tryin to be an as$hole but if you go to Member Builds and search Durango, about 5 or 6 different builds with "Durango" in the title of the thread show up in the 1st page, One of those being Chodes'

i no i did that thats y i posted this, i no chodes build, but he has a new one and there different body styles, and the other 2 were my body style but were walls and im not doin a wall, and im tryin to get ideas of where to mount the 4 amps and 2 batteries

[99vic]

i had an 01... hope what i posted above was some help.

[cartunez2004]

i had an 01... hope what i posted above was some help.

thats looks good but were the batterys under where the third row was ?? and did u build the floor up ? and how did u secure the batts

Edited December 9, 2009 by cartunez2004

[99vic]

this is what was under the floor,

the batteries were held in by L brackets. the floor was supported by 2x4 legs on each corner and one in the center. i took the whole seat out. we used a 3/4 piece of wood. it fits perfect where the lip is in the back( you will see what im talking about if you remove the 3rd seat) we measured 2x4s from floor to bottom of wood it all fit pretty easy.

[cartunez2004]

i seen that today when i was lookin at it if u go from the rear it drops down like an inch than drops down again where the bottom of the third row sits do u got any more pics of the floor u built just curious lol

[99vic]

i seen that today when i was lookin at it if u go from the rear it drops down like an inch than drops down again where the bottom of the third row sits do u got any more pics of the floor u built just curious lol

iirc it was 3/4" at the 1st drop, because the wood lays perfect. then that 2nd one, and the 3rd is where i had the batteries and amps. i dont have anymore pics, someone else took them. it was very simple. i dont have the system anymore or id take some pics for you. i had the system about a month lol

Edited December 9, 2009 by 99vic