CaptainzPlanetz Posted December 24, 2009 Report Share Posted December 24, 2009 Dont Bore a Hole in the side of you sealed box and think you have a ported box now. This was my buddys "Ported" Box, before I hooked him up with an actual ported box for his subs. ¿ǝɯɐƃ ǝɥʇ Trolls never learn............ All BS aside, If I see one more comment in here that is NOT about the pre-sale, I will start the vacations. And that includes the trolls feeding the trolls. YOU THE ONE THAT SOUND LIKE A OGER AND HUMPBACK/TROLLS? Add "SMDLIFER" on Xbox LIVE to play with other SMD members. Link to comment Share on other sites More sharing options...
uhoh_45 Posted December 24, 2009 Report Share Posted December 24, 2009 t'was joking sealed boxes can beat hard but they're low-end lacks. (not saying its absent lol). if you design them right and have a qtc of .7 or so then itll sound great and beat. Dont listen to this guy ^^ sealed box's have great low end just need the right amount of subs and a proper sealed box none of that prefabed shit look at how many Loud bassracers out there that have/had sealed box's R.I.P! (Nov-29-2009) 92 explorer - 4 Atomic Apxx 15s duel .7s - 4rth order bandpass wall -4 powerbass XA-3000D's - 16 8volt batts wired to 16 volts - (9+/9-) runs 0gauge - 152.3 Db @ 29hz BUILD LOG current build 97 chevy lumina4 - 1 Atomic Apx 18 - 6 cube slot port trunk sealed off - 1 powerbass XA-3000D - 2 optima G31s in spare tire18 1 run 1/0 lumina build log Link to comment Share on other sites More sharing options...
Guest Posted December 24, 2009 Report Share Posted December 24, 2009 Dont listen to this guy ^^sealed box's have great low end just need the right amount of subs and a proper sealed box none of that prefabed shit look at how many Loud bassracers out there that have/had sealed box's i never said they werent loud. i said their low end lacked on paper. the response level is normally an upsidown U from all the times ive played around with sealed boxes. anyways Link to comment Share on other sites More sharing options...
mrrairai Posted December 24, 2009 Report Share Posted December 24, 2009 This is a thread about Do's and Don'ts of car audio!!!! Member since 25 Jun 2006 2011 Yukon DenaliCustomLightz 4300K HID RetrofitEsky TailsEsky Third BrakeEsky 22sEsky Appliques Link to comment Share on other sites More sharing options...
blackrosetiger Posted December 24, 2009 Report Share Posted December 24, 2009 Take your main fuse out before you do anything. It will save you a couple of bucks and trips to the local car audio shop.. and it will keep you from screaming oh fuck whenever you touch your power wire to something it's not supposed to be touched to haha How about trying to just disconnect the main battery its alot safer 1998 Plymouth Voyager (daily) Jensen VM9213 H.U. (I Know but I havent had any problems.... yet) 5.25" Factory -> Sound Stream SST5.2 6x9 Hifonics ZXi 693 -> Sound Stream SST6.9 Amp: Class D: Crescendo 3KWP (x2) Class A/B: Crescendo 1000C4 Sub: Almani S-7 10" (x6) Link to comment Share on other sites More sharing options...
finkster Posted December 24, 2009 Report Share Posted December 24, 2009 do not hook up just one coil of a DVC sub Kicker claims the same, but as long as you only run half the power then you can run only one coil. DAT 4125------>RE XXX comps active Eclipse cd7000 I serve drunks for a living Link to comment Share on other sites More sharing options...
blackrosetiger Posted December 24, 2009 Report Share Posted December 24, 2009 lol thats funny Dont Bore a Hole in the side of you sealed box and think you have a ported box now.This was my buddys "Ported" Box, before I hooked him up with an actual ported box for his subs. 1998 Plymouth Voyager (daily) Jensen VM9213 H.U. (I Know but I havent had any problems.... yet) 5.25" Factory -> Sound Stream SST5.2 6x9 Hifonics ZXi 693 -> Sound Stream SST6.9 Amp: Class D: Crescendo 3KWP (x2) Class A/B: Crescendo 1000C4 Sub: Almani S-7 10" (x6) Link to comment Share on other sites More sharing options...
blackrosetiger Posted December 24, 2009 Report Share Posted December 24, 2009 Dont be afraid to fail. We've all done it (some will admit it before others) Dont be afraid to ask questions. and DO learn from your mistakes. (burn up an amp and you'll know what I mean) 1998 Plymouth Voyager (daily) Jensen VM9213 H.U. (I Know but I havent had any problems.... yet) 5.25" Factory -> Sound Stream SST5.2 6x9 Hifonics ZXi 693 -> Sound Stream SST6.9 Amp: Class D: Crescendo 3KWP (x2) Class A/B: Crescendo 1000C4 Sub: Almani S-7 10" (x6) Link to comment Share on other sites More sharing options...
robbie Posted December 24, 2009 Report Share Posted December 24, 2009 why dont bump at stop lights? lol Link to comment Share on other sites More sharing options...
robbie Posted December 24, 2009 Report Share Posted December 24, 2009 why dont bump at stop lights? lol Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.