gi joey Posted January 27, 2010 Author Report Share Posted January 27, 2010 you might just not have enough room for that setup. Well I am gonna give the aeros a shot. Ill trim what I have to off them than Ill see what happens. If it sounds bad ill try the 6". And if those even suck I might try 2 6" aeros. One on either side. Ive talked to some local guys and they have said that I would even be good with 2 4" aeros with the power I have going to the subs. I wont push as much air but it will sound good in the cab of a truck. So I will do the 3 4" first. Quote Truck 1 96 Silverado Ext cab 4 JL w6v2 12"s 2 JL 1000/1's 2 sets of JL XR components RF 4 Chan Blowthrough 141.5 @ DB drag street max 3-4 148.8 outlaw. Truck 2 silverado 2500HD Ext Cab- Building this truck now 4 RE SE 10" JBL BPX 2200.1 Soundstream 4 chan JL XR comp RF 3 ways Subs under rear bench lifted 4" Link to comment Share on other sites More sharing options...
gi joey Posted January 27, 2010 Author Report Share Posted January 27, 2010 I have it figured out how to get all 3 4" aeros in there. It will fit nicely adding another baffel on the inside of the box. I cut the holes at an angle to kinda match that of the aeros and the inside baf holes are jus a little over 4". I can just put the ports together before I put th top of the box on. Problem solved. I will barely even need to trip the lip on one port. Came out perfect. Ill post up some pics. Quote Truck 1 96 Silverado Ext cab 4 JL w6v2 12"s 2 JL 1000/1's 2 sets of JL XR components RF 4 Chan Blowthrough 141.5 @ DB drag street max 3-4 148.8 outlaw. Truck 2 silverado 2500HD Ext Cab- Building this truck now 4 RE SE 10" JBL BPX 2200.1 Soundstream 4 chan JL XR comp RF 3 ways Subs under rear bench lifted 4" Link to comment Share on other sites More sharing options...
gi joey Posted January 27, 2010 Author Report Share Posted January 27, 2010 Ill post up more when I get her closer. Im headed back out to cut more MDF. Quote Truck 1 96 Silverado Ext cab 4 JL w6v2 12"s 2 JL 1000/1's 2 sets of JL XR components RF 4 Chan Blowthrough 141.5 @ DB drag street max 3-4 148.8 outlaw. Truck 2 silverado 2500HD Ext Cab- Building this truck now 4 RE SE 10" JBL BPX 2200.1 Soundstream 4 chan JL XR comp RF 3 ways Subs under rear bench lifted 4" Link to comment Share on other sites More sharing options...
wL<3bass Posted January 27, 2010 Report Share Posted January 27, 2010 Worst case scenario you have to go sealed.... Quote Vehicle: 1997 S10 Blazer 4dr 4X4 Exterior: Rear End Bagged, Black Grill, Lifted 2" Amplifiers: Rockford Fosgate T8004 & T10001bd Batteries: 2 Stinger SPV35, Kinetik HC2400 Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube) Headunit: Eclipse CD3200 w/ 80G iPod Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors) Subwoofers: 1 15" Fi BL Fully Loaded Wire: All 1/0g Kicker Hyperflex My YouTube Videos My Fiberglass A-Pillar Build My "Seamless" Looking Box Build My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer) My Stealth 8" Fiberglass Build (for '05 TrailBlazer) My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk My feedback/references... Link to comment Share on other sites More sharing options...
gi joey Posted January 28, 2010 Author Report Share Posted January 28, 2010 Sealed NEVERRRR. lol. I just came from sealed. I prefer my ported boxes. OK here we go, Got /4 of the box built. Once the fiberglass drys I can start filling it up with sand till I get my airspace. Then back to figuring out my port length. I will assume that I will be around 5.9 after DD but We will see how close my guess was. I wouldnt mind being a little less. I would like to come in colse to 5 cubes after port displacement. Here she is, dryin in the garage makin my whole house smell like resin. The ports are just kinda sittin in there. I just wanted to make sure they would clear the floor hump and hell I just wanted to look at them. lol. Not too bad. These are from the back side of the box. I dont want to move it around too much while its wet. I have a board over the top right now with some subs and a kinetik bat weighing it down. I will add another baf to the front when I am getting ready to mount the subs. I think I will recess the subs too. I have some 3/8" aluminum rod that I am using for the grill guard. I will take the rod over both subs on each side and use 2 rods per side. Quote Truck 1 96 Silverado Ext cab 4 JL w6v2 12"s 2 JL 1000/1's 2 sets of JL XR components RF 4 Chan Blowthrough 141.5 @ DB drag street max 3-4 148.8 outlaw. Truck 2 silverado 2500HD Ext Cab- Building this truck now 4 RE SE 10" JBL BPX 2200.1 Soundstream 4 chan JL XR comp RF 3 ways Subs under rear bench lifted 4" Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.