Guest Posted January 30, 2010 Report Posted January 30, 2010 superfail..well good thing i didnt do it if i had my dc power alt i wouldve you dont get it. it wont work period. ITS 2 DIFFERENT AMPS Quote
F1rtyfwe Posted January 30, 2010 Author Report Posted January 30, 2010 (edited) yea you can, but not with 2 different amps. DERP ok i under stand 2 different boards Edited January 30, 2010 by F1rtyfwe Quote
F1rtyfwe Posted January 30, 2010 Author Report Posted January 30, 2010 you dont get it. it wont work period. ITS 2 DIFFERENT AMPS i was just saying if i would've done i would've been screwed, i know i wont work. now obviously Quote
Ben Building Posted January 30, 2010 Report Posted January 30, 2010 Swap your sub out for two D2s and still use both amps. I'm assuming you have a D1 or D4 sub now. Quote
F1rtyfwe Posted January 30, 2010 Author Report Posted January 30, 2010 Swap your sub out for two D2s and still use both amps.I'm assuming you have a D1 or D4 sub now. d2 Aq HDC3 was gonna do a 1ohm strap when i got my alt from DC power alt. i might be able to work a trade to get matching new heatsinks Quote
95_1500 Posted January 30, 2010 Report Posted January 30, 2010 (edited) Send Jacob an email about it, they may still be strappable. I wasnt aware they changed board layouts from old heatsink to new but i wouldnt try it until you hear it from him. *strapping at 1ohm is .5 on each amp so if you like your warranty id get a d1 or d4 Edited January 30, 2010 by 95_1500 Quote Original Build http://www.stevemeadedesigns.com/board/index.php?showtopic=24095
F1rtyfwe Posted January 30, 2010 Author Report Posted January 30, 2010 i kno i'm aware of the warranty loss my old saz1500d ran like a champ at .5ohm on a sealed box so no imp rise w/ an spv44 and 2 runs of 0 +stock alt supporting it i know w/ a DC alt would be able to support them just fine but i'll email jacob and ask him i doubt i can do anything i'm in no hurry ill work it all out some how and Kranny sorry no disrespect i just thought otherwise and thought you were BS'in me my bad Quote
95_1500 Posted January 30, 2010 Report Posted January 30, 2010 i kno i'm aware of the warranty loss my old saz1500d ran like a champ at .5ohm on a sealed box so no imp rise w/ an spv44 and 2 runs of 0 +stock alt supporting it i know w/ a DC alt would be able to support them just fine but i'll email jacob and ask him i doubt i can do anything i'm in no hurry ill work it all out some how and Kranny sorry no disrespect i just thought otherwise and thought you were BS'in me my bad Sealed boxes have a lot of impedance rise Quote Original Build http://www.stevemeadedesigns.com/board/index.php?showtopic=24095
F1rtyfwe Posted January 30, 2010 Author Report Posted January 30, 2010 Sealed boxes have a lot of impedance rise guess i'm wrong again its cool i dont care right now ima worry about this shit another day Quote
95_1500 Posted January 30, 2010 Report Posted January 30, 2010 guess i'm wrong again its cool i dont care right now ima worry about this shit another day Wasn't trying to "prove" you wrong or anything i was just sayin your amp wasnt seeing .5 with that box Just email Jacob on Monday and go from there Quote Original Build http://www.stevemeadedesigns.com/board/index.php?showtopic=24095
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.