ryanFA5 Posted February 21, 2010 Report Share Posted February 21, 2010 UPDATE: SHOULD be getting this done today...all thats left: Cut hole in floor under passenger seat, weld in flast spot to fit amp running highs under seat. Wire up passenger side 4x10 charge capacitor set gains I think that's it... vids when you get this done would be nice!! id love to see how this turns out 2010 Civic SI sedan: Crystal Black Pearl All stock. Link to comment Share on other sites More sharing options...
BeachJoshua Posted February 21, 2010 Author Report Share Posted February 21, 2010 vids when you get this done would be nice!! id love to see how this turns out This is a definate.... | S-10 | 4.5^3 ft | 33Hz | SAE-1000D @ 1 Ohm | 2 SA-12s | SPL: 143.7 Sealed | 153.4 Port Wars Link to comment Share on other sites More sharing options...
STEvil Posted February 21, 2010 Report Share Posted February 21, 2010 Nice looking little build You can add more length to the port internally probably if it doesnt quite work out, might be easier than glassing and putting in aero's. MickyMcD - "Capable of making some serious trouser flapping volumes at where's-my-testicles frequencies, the Servo-Drives used to be fairly jaw dropping..." Any time you have have a power wire next to your frame put some rubber hosing (or cut up an innertube) around it. The wire is bound to wiggle (due to driving or flex) and the casing will eventually wear through. Hammerdown... 1% no links to outside websites, business related FB/YT pages allowed. Link to comment Share on other sites More sharing options...
BeachJoshua Posted February 24, 2010 Author Report Share Posted February 24, 2010 Nice looking little build You can add more length to the port internally probably if it doesnt quite work out, might be easier than glassing and putting in aero's. Won't adding more length to the port just mess with the tuning? | S-10 | 4.5^3 ft | 33Hz | SAE-1000D @ 1 Ohm | 2 SA-12s | SPL: 143.7 Sealed | 153.4 Port Wars Link to comment Share on other sites More sharing options...
fritosaregood Posted February 24, 2010 Report Share Posted February 24, 2010 Won't adding more length to the port just mess with the tuning? it will make it lower, it will also decrease the volume, which will raise the tuning but you need more port area first. seller feedback: http://www.stevemeadedesigns.com/board/ind...showtopic=61719 http://www.stevemeadedesigns.com/board/ind...showtopic=68281 build log: http://www.stevemeadedesigns.com/board/index.php?showtopic=44800 Gf's build: http://www.stevemeadedesigns.com/board/topic/54346-kickergirls-camaro-new-box-pg-5/#entry753970 Link to comment Share on other sites More sharing options...
BeachJoshua Posted February 24, 2010 Author Report Share Posted February 24, 2010 | S-10 | 4.5^3 ft | 33Hz | SAE-1000D @ 1 Ohm | 2 SA-12s | SPL: 143.7 Sealed | 153.4 Port Wars Link to comment Share on other sites More sharing options...
Sanitarium Posted February 24, 2010 Report Share Posted February 24, 2010 I like how you figured out you were wrong last time and apologized for being an asshole, then turn around and ignore everyone telling you not to use a cap. Link to comment Share on other sites More sharing options...
El1T3Bass Posted February 24, 2010 Report Share Posted February 24, 2010 loooking good, but seriously, get rid of the cap, it is seriously hurting your electrical, just sellit on craigslist or something and get a kinetik, or stinger battery, there pretty cheap and they would help everything 1000000 times more than a cap.... just shaying wow now this just shows that smd isnt just any forum. We are a brother hood. here let me put it in retard-onix for u aareehhhh duuuurrrrr ehhh got it now? Sweet baby jesus the amount of quoting the quote above the quote in a quote is epic Link to comment Share on other sites More sharing options...
BeachJoshua Posted February 24, 2010 Author Report Share Posted February 24, 2010 loooking good, but seriously, get rid of the cap, it is seriously hurting your electrical, just sellit on craigslist or something and get a kinetik, or stinger battery, there pretty cheap and they would help everything 1000000 times more than a cap.... just shaying I would... but my dad makes all the descisions. | S-10 | 4.5^3 ft | 33Hz | SAE-1000D @ 1 Ohm | 2 SA-12s | SPL: 143.7 Sealed | 153.4 Port Wars Link to comment Share on other sites More sharing options...
cc_audio Posted February 24, 2010 Report Share Posted February 24, 2010 I would... but my dad makes all the descisions. There comes a time in every man's life when you must beat up your dad. This is one of those times, so go kick his ass! Then sell the cap... It's all gone! The Celica Build Feedback If I buy something from you, DO NOT USE FEDEX! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.