CJtech323 Posted March 13, 2010 Report Posted March 13, 2010 Alright so I have two 10" subs with dual 4 ohm voice coils and 350w rms rating. If I am going to wire them together for a 1 ohm load, what power rating does the amp need to push out at 1 ohm to get the rms watts to them, is it still 350w? thanks
kl0wn Posted March 13, 2010 Report Posted March 13, 2010 Alright so I have two 10" subs with dual 4 ohm voice coils and 350w rms rating. If I am going to wire them together for a 1 ohm load, what power rating does the amp need to push out at 1 ohm to get the rms watts to them, is it still 350w? thanks If you want to put 350 RMS to each sub, you will need an amp that pushes out at least 700 RMS @ 1 ohm. 06 Mini Cooper S Sundown, SoundQubed Cadence, XS Power 151s Sealed 155s Outlaw Windshield @ 37hz
wolfpack Posted March 14, 2010 Report Posted March 14, 2010 just find an amp that pushes 700 wrms at 1 ohm. since your wiring them together it doubles the rms rating. you can also wire them to 4 ohm, it might be easier to find an amp that pushes 700 watts at 4 ohm 2010 Subaru Impreza Pioneer AVH-P1400DVD 2 10" Rockford Fosgate Punch HX2 Audison LRx 1.1K superglue a dildo to the center of the cone....lube it.....then have that dumbass sit on it while playing a 10hz note haha, this reminds me of a paintball sticker i have "my balls slap at 300fps" now I want a sticker that says "i fuck at 10hz"
Recommended Posts
Archived
This topic is now archived and is closed to further replies.