bayoublaster Posted April 14, 2010 Report Share Posted April 14, 2010 I am looking for components (6.5 - 6.75 X tweeters) that have higher power handling. Am I f*^ked in the head for thinking that higher RMS handling equates to higher dB? I have RF T600-4 to run components and I want to get the most out of my amp and components system. Which components do you guys use and at what RMS power (size of amp) for your systems? Quote Link to comment Share on other sites More sharing options...
wL<3bass Posted April 14, 2010 Report Share Posted April 14, 2010 I am looking for components (6.5 - 6.75 X tweeters) that have higher power handling. Am I f*^ked in the head for thinking that higher RMS handling equates to higher dB? I have RF T600-4 to run components and I want to get the most out of my amp and components system. Which components do you guys use and at what RMS power (size of amp) for your systems? I typically throw 1.5-3x the RMS rating to my components... Gives me headroom to keep the sound clean and loud. Quote Vehicle: 1997 S10 Blazer 4dr 4X4 Exterior: Rear End Bagged, Black Grill, Lifted 2" Amplifiers: Rockford Fosgate T8004 & T10001bd Batteries: 2 Stinger SPV35, Kinetik HC2400 Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube) Headunit: Eclipse CD3200 w/ 80G iPod Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors) Subwoofers: 1 15" Fi BL Fully Loaded Wire: All 1/0g Kicker Hyperflex My YouTube Videos My Fiberglass A-Pillar Build My "Seamless" Looking Box Build My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer) My Stealth 8" Fiberglass Build (for '05 TrailBlazer) My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk My feedback/references... Link to comment Share on other sites More sharing options...
bayoublaster Posted April 14, 2010 Author Report Share Posted April 14, 2010 I typically throw 1.5-3x the RMS rating to my components... Gives me headroom to keep the sound clean and loud. headroom..... please explain? How do you keep from blowing the components? volume control...amp gains calibration? i have a RF T600-4 to run front and rear components in my '04 Yukon and most of the shops are telling me that the amp is to big for any of their recommended component systems... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.