sfbd sema chevy

[jay33blu]

Well I started my build a little bit a go and have gotten quite a bit done over the past couple months. I have had the opportunity to work with some great people. Feel free to ask any questions that you want as that will be the only way you can learn or hell for me to maybe learn somethin. My rendering was done by R.J. Silva from eyekandydesigns.com so check him out.

I bought the truck for five hundred dollars from a buddy that was using it for a garbage truck. Went ahead and bought the twenty twos with the 295/45/22 tires which are 32 inches outer diameter which is about the same as a 30 series 26 inch tire.

[jay33blu]

Started the sfbd three days ago and pretty much finished it except some shaving and grinding. Built the rear bridge and the compressor tank and valve mounts.

[jay33blu]

[jay33blu]

Curious what everyone on here thinks about the Kenitik batteries also. I have two of them and an Optima Red Top battery that I am going to run. Still have to figure out alternator and Ive never done a cut through in a standard cab truck, but I have two Kicker 15 inch L7s that I have from another project that I got done with.

[jay33blu]

I know you all were feeling my shamwow below my batteries. I have a buddy that powdercoats and I got my bars and cups back the other day. They are Anthracite.

Whats left of my stock carms

http://i237.photobucket

.com/albums/ff146/jay33blu/low%2088/101_2485.jpg[/img]

$25,000 dollar bending machine

[jay33blu]

[jay33blu]

[WaTTz305]

beautiful.

i would do this to my car if i knew someon that could lol

[jay33blu]

the new carms and yeah they will lay out on a 26 inch rim and tire.

[jay33blu]

m/albums/ff146/jay33blu/low%2088/000_0064.jpg[/img]