Jump to content

Recommended Posts

http://columbiamo.craigslist.org/cto/1733324983.html

i might buy it, but is it worth the price of de-ricing it? ex. painting the interior back to stock looking.

obvious mods would be ripping out the factory system, putting in a alpine deck, a nice 4 ch amp, a sundown 3k, full dayton reference drivers and highs, a dc lvl 4 xl, of course 2-3 layers of dampening in the car, and a 300 amp alt or 2 150a alts.

for the performance, a family friend that builds some insane cars has a twin screw 350 that did 460 on his dyno, he said i could have it for $2k, so i might swap for that... i would most likely do sequential gearbox, locked rear dif, and for tires we will have to see when the time comes, for suspension, most likely eibach coil overs, or something stiffer if i can find anything stiffer, custom sway bars, lighter alum. or carbon parts wherever i can find them, for brakes i would most likely upgrade to some 6 pistons with braided lines, for the body, i would most likely make fiberglass fenders, hood, trunk lid, and rear bumper, to make up for the weight of the system, and go with a primer gray look, matte white/or black, or chalkboard black.

inb4 cool story bro. what do you guys think? worth the 6k-7k overall?? i can make alot of the parts, so that may be an over exaggeration of the overall price.

24pm3xe.jpg

im taking out my passenger seat, battery is disconnected, going to unwire and take out the three amps, take out the 70+ lb box, then the platform so i can crimp 1 wire.

Almost as bad as those fegs that put those horns in their grills and roll down the street distorting the block....

1990 Jeep Cherokee 2 Dr.

Big-3 in 0g on Stock Alt.

Pioneer 6.5" and 5.25"s temp. until i can afford the new crescendos.

Pioneer 6000ub Reciever

NO amps at the moment. SA-15 on 1kw coming soon.

MSG Me for a free enclosure design!!

Flared port kits coming soon!!

Link to comment
Share on other sites

do it do it do itttt

Steve I don't know why but everytime I see your new paint I want a Dr. Pepper...... is this normal?

heres an analogy for you. running a high power stereo without a fuse is like having unprotected sex with that hot chick at the bar with the sketchy sexual history. Sure you may be fine and nothing happens but that one time something does happen you're fucked.

i dont want woofer broke like bass sound clip clip and voice coil overheat

2 sa12s, saz1500 build log http://www.stevemeadedesigns.com/board/topic/91183-chapo123s-sundown-build-log/page__gopid__1250604entry1250604

1j1450.png

Link to comment
Share on other sites

Depends on how strong the motor is(to me). i really dont feel like buying a car and within a week of driving it throw a couple of rods out the side of it( you feel me). just have to test drive get on it a few times, but i think the car has potential, looks fairly decent from the small photos.

...............................____

...............__________|___\____

..;.;;.:;:;.,;.|__(O)____|____/_(O)

1978 F-150 Ranger Lariat

2 Sets of Sound-stream Components

Sony Head-unit

DDM Tuning 8000k's

Euro Headlights (Projectors Soon)

Green Led Wheel Wells

Dark Red Tails Tint

Link to comment
Share on other sites

Only white trash drive Camaros, Firebirds, Trans Ams, etc.

Oh do share with us the vehicle of your choice kind sir, because I'm sure we can all stereo type the hell out of your ride... GTFO.

| S-10 | 4.5^3 ft | 33Hz | SAE-1000D @ 1 Ohm | 2 SA-12s |

SPL: 143.7 Sealed | 153.4 Port Wars

Link to comment
Share on other sites

Oh do share with us the vehicle of your choice kind sir, because I'm sure we can all stereo type the hell out of your ride... GTFO.

+1

2001 Bravada (2wd) Pewter on 24's

JVC KW-AV60BT

10 Alpine Type-S 6.5s

2 PSI/BTL 18's @ 32Hz

2 Rockford Fosgate T25001-bd's @ 1-ohm each

Rockford Fosgate T1000-4

Rockford Fosgate T400-4

Rockford 3Sixty.2

Yellow top up front, 2 9a31s in the back

LOTS of AT 1/0

Python 991

350 Amp Singer Alt

"Build Log"

My Facebook

My YouTube

i didnt see the video or read anything but...cool story

and the reason your being a cock tonight is?

Link to comment
Share on other sites

Depends on how strong the motor is(to me). i really dont feel like buying a car and within a week of driving it throw a couple of rods out the side of it( you feel me). just have to test drive get on it a few times, but i think the car has potential, looks fairly decent from the small photos.

im going to be swapping the motor in the first month most likely, i have an extra 455 from my buick with a stroked crank that i have been wanting to put in something, or spend the 2k on the supercharged 350 built a family friend, just for perspective, he hand built a 1500hp camaro that runs in the 8's, but can still cruise at 30 mph, some impressive stuff, that 350 has never been run, he built it for a nova of his but went with a 502 instead.

and for the guy saying only rednecks but camaros, you are extremely ignorant. camaros make great GT cars, and if i could, i would much rather buy a miata. hope that ends the "hes a redneck" routine.

Car of choice = S15 Silvia.

no good ones around here, and im not driving to st louis to find one.

Edited by BanginOnABudget

24pm3xe.jpg

im taking out my passenger seat, battery is disconnected, going to unwire and take out the three amps, take out the 70+ lb box, then the platform so i can crimp 1 wire.

Almost as bad as those fegs that put those horns in their grills and roll down the street distorting the block....

1990 Jeep Cherokee 2 Dr.

Big-3 in 0g on Stock Alt.

Pioneer 6.5" and 5.25"s temp. until i can afford the new crescendos.

Pioneer 6000ub Reciever

NO amps at the moment. SA-15 on 1kw coming soon.

MSG Me for a free enclosure design!!

Flared port kits coming soon!!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members, 0 Anonymous, 1089 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...