Jump to content

F/S: Sundown Sae1200d - CHEAP


Recommended Posts

1. Product:

Sundown SAE-1200D v1

2. Specs:

1200 x 1 watts @ 1 ohm

600 x 1 watts @ 2 ohms

300 x 1 watts @ 4 ohms

0.153v - 5.6v adjustable input sensitivity

RCA Line-Out Jack

15 Hz - 250 Hz Frequency Response

> 90 dB S/N Ratio

4-Way Protection Circuit (Thermal, Overload, Speaker Short, and Over Current)

50 Hz - 250 Hz adjustable 12dB Low-Pass Crossover

15 Hz - 50 Hz adjustable 12dB Subsonic Filter

0 or 180 degree adjustable phase switch

0 - 12 dB adjustable bass boost with 60 Hz center frequency

Wired Remote Control unit included

5x 30 Amp Internal Fuses

17" L x 10.6" W x 2.2" H

MSRP $499 USD

3. Description/Condition:

Used but 10/10 mechanically and 9/10 cosmetic, it has a tiny ding on the front fin of the heatsink. Does not have the wire/knob.

4. Price:

200 Shipped

5. Pictures:

db8257e3.jpg

af5049da.jpg

904caa69.jpg

472137c1.jpg

Edited by EricR

i was thinking leave the 12 sitting in the box in the hole and duck tape from the bottom of the sub to the bottom of the baffle so the sub doesnt free air. would that work?

Link to comment
Share on other sites

200 shipped to 94085? let me know... thanks. :popcorn:

The Project!!

dunkoholicavatar-copy3.gif

1954 Trunk Build

http://www.stevemeadedesigns.com/board/topic/102529-1954-chevy-belair-trunk-build/

-----------------------------------------------------------------------------------

The Daily!!

dunkoholicavatardc.gif

Head Unit: Alpine 9883

Subwoofer: 2 12's DC Level 4 XL

Amplifier: New DC 3.5 K

Rear Center Console: 1 8' DD 1508

Amplifier: Rockford fosgate 500

Mids and Tweets: Beyma tweets

e36 Trunk/Subwoofer Build

http://www.stevemeadedesigns.com/board/ind...showtopic=27903

Link to comment
Share on other sites

price shipped to 47130

Vehicle: 1995 Impala SSHead Unit: Pioneer AVH-P4400BHMids And Highs: (still deciding)Batteries: 1 Deka Group 34

Time to make a race car.My Build Log: Solo X 12"http://www.stevemead...don15zzz-build/My Build Log: DC lvl 4 xl 15"http://www.stevemead...don15zzz-build-My Wall Build Log: 4 Lanzar 15's/ 3k+ RMShttp://www.stevemead...t-by-techforce/My Feedback:http://www.stevemead...1

Link to comment
Share on other sites

200 shipped to 94085? let me know... thanks. :popcorn:

can't do that, shipping is 27$.

i was thinking leave the 12 sitting in the box in the hole and duck tape from the bottom of the sub to the bottom of the baffle so the sub doesnt free air. would that work?

Link to comment
Share on other sites

Bump

i was thinking leave the 12 sitting in the box in the hole and duck tape from the bottom of the sub to the bottom of the baffle so the sub doesnt free air. would that work?

Link to comment
Share on other sites

Up top

i was thinking leave the 12 sitting in the box in the hole and duck tape from the bottom of the sub to the bottom of the baffle so the sub doesnt free air. would that work?

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   2 Members, 1 Anonymous, 1121 Guests (See full list)

×
×
  • Create New...