Quick Belt Tensioner ?

[cubs_fan0718]

im stupid, i got it

lol at least u can admit it, my buddy wouldnt listen to me one time when he was replacing a belt for me, i told him there was a spot for the socket and he said no no u gotta do it like this ( the actual bolt that holds it on) well he ended up breaking my tensioner pulley i was pretty pissed and i made him go buy a new one and showed him what i was talking about. I learned my lesson and i'll just do it myself next time.

[Wastehog]

Not stupidity, unknowledgeability. lol. Your right the wire covered with the shroud on the back of your alt is your (+) positive. If you're doing big 3 run the wire from the + on the batt to that spot on your alt, and do the rest of it. Asking questions never hurt anyone. Better then messin something important up lol.

lol at least u can admit it, my buddy wouldnt listen to me one time when he was replacing a belt for me, i told him there was a spot for the socket and he said no no u gotta do it like this ( the actual bolt that holds it on) well he ended up breaking my tensioner pulley i was pretty pissed and i made him go buy a new one and showed him what i was talking about. I learned my lesson and i'll just do it myself next time.

I had a buddy jack up my car on the oil pan. He won't admit he placed the jack. He crushed the oil pan ($50) the pump pick up ($20) and the gasket was shot ($50) cost me $120 because people don't ask questions..

Edited May 17, 2010 by Wastehog

[95_1500]

Hmm mine doesnt have a square hole to "stick a ratchet into" just the welded nut or w/e you stick an 15 mm socket on. At least you got it