pRoFsWiRlY Posted May 29, 2010 Report Share Posted May 29, 2010 Can someone point me in the right direction for a good tutorial on how to use audacity to tweak frequencies... I'm thinking that an adjustment on "Shining Star" by Earth Wind and Fire could use a bit of a tune up! Quote Ride - 2006 Scion xB Equipment: H.U. - Kenwood KDC-X793 Amps - Memphis 16-MC2.100 Memphis 16-MC1.1100 Front Stage - Memphis 15-MCC6 6.5 Components with silk dome tweets Subs - Memphis 15-M310D4 10" Sub (x2) Custom box 3.02 ft3 after displacement, tuned to 37 hz Big 3 Second Skin Damplifier Coming soon: Kinetik HC1400 H.O. Alt AudioControl three.1 Link to comment Share on other sites More sharing options...
Colin - STAPUFT Posted May 29, 2010 Report Share Posted May 29, 2010 Open the song in Audacity. Find the part of the song with the note that you like. Highlight that part of the song. Go to Analyze, then Plot Spectrum. On the Frequency Analysis window: Change the settings from 512 to 1634 & change Linear Frequency to Log Frequency. You will be able to see all of the peaks as well as the loudest singe note on the graph. Remember that / those frequencies. Close Frequency Analysis. Go to Effect, then Bass Boost. Put in the frequency you want to boost and by how many DB. NOTE: it is really really easy to make things one notish like this, and be very careful not too boost too much. You will know you have boosted too much when your boosted notes cause the track to clip. This is obviously bad- so don't boost them too much, or the track gets dirty. Happy Tweaking! Quote 12 - 12"s in the STAY PUFT 1989 Chevy Astro Build & Comment Log Un-Interrupted Build LogYouTube Channel Chevy Trailblazer 5.1 Dolby Digital DTS Install You have a beard of a mysterious sea captain. I would follow you to hell and back. Link to comment Share on other sites More sharing options...
chrispy Posted May 29, 2010 Report Share Posted May 29, 2010 well that helps him too colin but i think what hes asking is how to change the hz of the note so you need to follow colin's tut he posted and when you find your frequency you go under effects and choose change speed. either drag it to + or - depending on if you want the freq higher (+) or lower (-) this also speeds or slows the song down. about -8 is taking it down 4hz but you might have to play with it to get it right. and just keep checking plot spectrum after you change the speed. ive never done it this way, but you might also be able to do it changing the pitch under effects also. sounds cleaner imo to slow it down though Quote my system 2 12" diamond d3 subs Kenwood 500 watt class d mono amp On 4/14/2010 at 5:40 PM, Boon said: Waaaaaa my system has a minor issue that I can't figure out so I'm gonna quit audio. Fucking weak man. Link to comment Share on other sites More sharing options...
Colin - STAPUFT Posted May 30, 2010 Report Share Posted May 30, 2010 Yeah, in one of his threads Decaf said it is better to slow a song than to change the pitch. And chrispy I believe you are right too- it sounds better slowed than changing the pitch. So you can boost frequencies and change them too. Quote 12 - 12"s in the STAY PUFT 1989 Chevy Astro Build & Comment Log Un-Interrupted Build LogYouTube Channel Chevy Trailblazer 5.1 Dolby Digital DTS Install You have a beard of a mysterious sea captain. I would follow you to hell and back. Link to comment Share on other sites More sharing options...
dwz Posted May 30, 2010 Report Share Posted May 30, 2010 Yeah, in one of his threads Decaf said it is better to slow a song than to change the pitch. And chrispy I believe you are right too- it sounds better slowed than changing the pitch. So you can boost frequencies and change them too. Right, that way the rest of the sounds in the song are "right" for the bass your boosting Quote Link to comment Share on other sites More sharing options...
basshead2010 Posted May 10, 2011 Report Share Posted May 10, 2011 Open the song in Audacity. Find the part of the song with the note that you like. Highlight that part of the song. Go to Analyze, then Plot Spectrum. On the Frequency Analysis window: Change the settings from 512 to 1634 & change Linear Frequency to Log Frequency. You will be able to see all of the peaks as well as the loudest singe note on the graph. Remember that / those frequencies. Close Frequency Analysis. Go to Effect, then Bass Boost. Put in the frequency you want to boost and by how many DB. NOTE: it is really really easy to make things one notish like this, and be very careful not too boost too much. You will know you have boosted too much when your boosted notes cause the track to clip. This is obviously bad- so don't boost them too much, or the track gets dirty. Happy Tweaking! thanks a lot bro. i followed ur steps and now i understand the whole process Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.