fmedina Posted June 5, 2010 Report Posted June 5, 2010 im still pretty new to this. currently i have a lil set up goin on in my 98 olds intrigue. buutt.. my new build comin soon is this... 1 Fi ssd 15 4.2 cu ft ported Hifonics Brutus BRZ1200.1D (bass) JVC Arsenal KD-AHD69 Kinetik HC 800 Tsunami AMP1040D (2 amp 0awg kit) Second Skin Damplifier for trunk (for now) Polk Audio db5251 5-1/4" 2-way Component System (usin my hifonics zues 2ch. that i already have to power these in the front) Polk Audio db691 what yall think? kinda on a budget so i wont be gettin all top notch sht yano. least not yet > ima stay in this game for a while til i get at least 4 18s yeeeee LOL. so ya let me kno wat yall think bout it and suggestions please.
Socky Posted June 5, 2010 Report Posted June 5, 2010 I think it will be a nice system, i personally think its nice to start out somewhere small and work ur way up to that badass system so it will make u realize how far u have came and worked up for. Jeep Cherokee 4dr -4.75 in front, new rusty's 4.5 in rear leafs -micky thompson 35x14.50x15 -locker rear -Rusty's offroad Engine/transmission/transfer case/crossmember/gas tank skid plates -Warn front bumper with 8000lb winch -Custom rear bumper -Warrior product tube doors (summertime) -Optima redtop (starter) -26XK miles and still runs like a bat out of hell Kenwood H/U 1/0 wire, 136 amp alt 200 ah batteries 12.7 daily 2 Apsm 1500 @ 2 ohm strapped on zv3 d1 with ns softparts Mb quart 125.4 wired to 4 aura 6's 3.6 cube box tuned to 36 plays down to 23hz
Guest Posted June 5, 2010 Report Posted June 5, 2010 why 4.2cuft? recommendations are 3-4. stick with like 3.5. and you can easily change out that dynafat deadener with secondskin deadener...its ftw. i dont know if tsunami has real wire (meaning not labeling 8 gauge wire as 4 gauge) or not cause idk how the hell you will fit 0 gauge in a 1200rms amplifier.
fmedina Posted June 5, 2010 Author Report Posted June 5, 2010 I think it will be a nice system, i personally think its nice to start out somewhere small and work ur way up to that badass system so it will make u realize how far u have came and worked up for. hell ya i totally agree. i have 1 12" jl rite now and upgradin to 1 15" fi. so im gettin there slowly. very slowly haha i want to learn how to do all that fiberglass work and custom builds. how awesome.
fmedina Posted June 5, 2010 Author Report Posted June 5, 2010 why 4.2cuft? recommendations are 3-4. stick with like 3.5. and you can easily change out that dynafat deadener with secondskin deadener...its ftw. i dont know if tsunami has real wire (meaning not labeling 8 gauge wire as 4 gauge) or not cause idk how the hell you will fit 0 gauge in a 1200rms amplifier. ya ill take a look at the secondskin. i kno they're good. and im still deciding which wire to use. im usin one 0 gauage and use a block to separate em in to two 4 gauge for the amps.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.