steven Posted June 7, 2010 Report Share Posted June 7, 2010 Okay I just got my crx tinted at 5% all the way around. There is small air bubbles in the tint in places, should I worry about this? Are they going to get bigger after time? Quote Link to comment Share on other sites More sharing options...
BeatBox Posted June 7, 2010 Report Share Posted June 7, 2010 in the middle or towards the edges? Quote Link to comment Share on other sites More sharing options...
devil4u2c Posted June 7, 2010 Report Share Posted June 7, 2010 I had a little civic hatch back that I had tinted a while back and it started out with little tiny bubbles but they went away after a day or two. Quote Link to comment Share on other sites More sharing options...
steven Posted June 7, 2010 Author Report Share Posted June 7, 2010 in the middle or towards the edges? Hold up I'll find my camera and see if you can see it if I take pics. Quote Link to comment Share on other sites More sharing options...
rubbernutz1 Posted June 7, 2010 Report Share Posted June 7, 2010 depends on how big the bubbles are and if they have air or water behind them. if they hav water behind them then ya they will go away in few days but if its air then your stuck with them. Quote Link to comment Share on other sites More sharing options...
BeatBox Posted June 7, 2010 Report Share Posted June 7, 2010 usually if its more than few minutes dry depending on how much soap u use can try to take them out carefully. if its too dry then u might crack or ripp the tint. when its in the edges and no matter how many time u go over and it keeps coming back i usually stick small piece of cardboard to keep pressure on the tint til it drys... Quote Link to comment Share on other sites More sharing options...
steven Posted June 7, 2010 Author Report Share Posted June 7, 2010 I dont mind being stuck with them if they stay the same size, but all the ghetto ass cars around here have wal mart tint that has massive bubbles it looks terrible I just wanna know if there is a chance mine will do that. Quote Link to comment Share on other sites More sharing options...
steven Posted June 7, 2010 Author Report Share Posted June 7, 2010 Quote Link to comment Share on other sites More sharing options...
bigredishott Posted June 7, 2010 Report Share Posted June 7, 2010 if they dont go away you could poke with a pin ang push the soapy water or air out, maybe even shrink it flat with a hair dryer. Quote Alpine CDA-9847 HU F Highs 2x Infinity Kappa 60.9CS Powered by Eclipse EA4200 Glass door panels R Highs Infinity Ref. 9622i powered by HU 3x RF Punch HX2 RFD2210 Powered by MTX Thunder 81000D Box Vol. 3.259 before displacement, Tuned 36.6, Port area 54" Link to comment Share on other sites More sharing options...
bigredishott Posted June 7, 2010 Report Share Posted June 7, 2010 didn't see pics, you could probably push them out with your finger or credit card if scratch resistant tint. Quote Alpine CDA-9847 HU F Highs 2x Infinity Kappa 60.9CS Powered by Eclipse EA4200 Glass door panels R Highs Infinity Ref. 9622i powered by HU 3x RF Punch HX2 RFD2210 Powered by MTX Thunder 81000D Box Vol. 3.259 before displacement, Tuned 36.6, Port area 54" Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.