jeyrapboy Posted June 10, 2010 Report Share Posted June 10, 2010 Okay my headline was falling down, so i went and picked up some glue so i could take out my headliner and re-glue it, well when i took out the headliner it literally crumbled and i have no idea what to do. There is more but i didnt feel like taking more pics. So i already know i am leaving it out, but any ideas on what i should put in it place. Serious ideas only. Something that not going to cost a shit ton. Quote Link to comment Share on other sites More sharing options...
BeachJoshua Posted June 10, 2010 Report Share Posted June 10, 2010 Uhm craigslist... duh... Quote | S-10 | 4.5^3 ft | 33Hz | SAE-1000D @ 1 Ohm | 2 SA-12s | SPL: 143.7 Sealed | 153.4 Port Wars Link to comment Share on other sites More sharing options...
Robert8252 Posted June 10, 2010 Report Share Posted June 10, 2010 Save what you can of the board and this http://www.wlsheadliners.com/tutorials/cherokee/ Quote 2013 F150 Crew Cab Old Build Log Feedback 2013 F150 Equipment - Some Awesome Stereo Sound Making Stuff Link to comment Share on other sites More sharing options...
Robert8252 Posted June 10, 2010 Report Share Posted June 10, 2010 oh.. And if your board isn't savable hit up some junkyard and find one in usable condition to re-wrap Quote 2013 F150 Crew Cab Old Build Log Feedback 2013 F150 Equipment - Some Awesome Stereo Sound Making Stuff Link to comment Share on other sites More sharing options...
Wastehog Posted June 10, 2010 Report Share Posted June 10, 2010 I'd also say the junk yard, or get crafty and make your own fiberglass one. You know most of us love a good project Quote 1985 Chevy Silverado Black and Silver SBC 350/700r4 Link to comment Share on other sites More sharing options...
jeyrapboy Posted June 10, 2010 Author Report Share Posted June 10, 2010 Well the board is not THAT bad and the cloth is ok. I figured i would go ahead and see if i could salvage it. Quote Link to comment Share on other sites More sharing options...
Wastehog Posted June 10, 2010 Report Share Posted June 10, 2010 (edited) Well the board is not THAT bad and the cloth is ok. I figured i would go ahead and see if i could salvage it. Good idea.. I mean, what more do you have to lose. If all else fails, you wasted a lil bit of time and some money on glue.. if it works then if it doesn't then... lol. By the way if you need new cloth, stockinteriors.com has the cloth, iirc. Edited June 10, 2010 by Wastehog Quote 1985 Chevy Silverado Black and Silver SBC 350/700r4 Link to comment Share on other sites More sharing options...
Carnag3 Posted June 10, 2010 Report Share Posted June 10, 2010 Step one: Use use some duct tape on the back of the board to strenthen it and repair the flaking parts Step two: Goto a fabric store or walmart and get some fabric and 3m spray adhesive Step three: Apply Quote 2000 Blazer 4dr -24" Boss 330s -Lowered 2/3 -5000k Hids w Projector Retro -Candy tails -LED interior lighting -20% tint 35% windshield -Alpine 9886 HU -RF P1462 Dash -RF P1652 Front -RF P1652 Rear -Two 18" Fi BTLs -MB Quart Onyx 4.80 -Two Audioque AQ2200Ds -Xs Powerr D5100, 2 Powersafe G31s -Knukoncepts 1/0 wire -Mechman 270 Alt w Boost Module -10.4 Net @ 28hz 140sq.inch of port My Youtube Channel!! Link to comment Share on other sites More sharing options...
jeyrapboy Posted June 10, 2010 Author Report Share Posted June 10, 2010 Step one: Use use some duct tape on the back of the board to strenthen it and repair the flaking parts Step two: Goto a fabric store or walmart and get some fabric and 3m spray adhesive Step three: Apply I got some headliner glue. Thanks for the advice. I think i am going to go ahead and try to salvage it today. Ill post pics when i am done. Quote Link to comment Share on other sites More sharing options...
jeyrapboy Posted June 11, 2010 Author Report Share Posted June 11, 2010 Well guys after looking the headliner board i discovered that on both sides there is a 6 inch break so its close to braking in half. I have decided to go the FIBERGLASS route. I am going to fix the break with fiberglass and resin. Then turn around and fiberglass the whole under side. Prolly paint it to match the paint outside or to match the interior idk yet. So if you know where to get some fiberglass mat cheap let me know. AUTOZONE has 8sq ft for 5.99 anything cheaper even online let me know THANKS! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.