now534 Posted July 4, 2010 Author Report Posted July 4, 2010 Just ordered my power wire. 1 0 gauge fuse holder with 150a fuse, 5 0 gauge ring terminals, 1 Grommet, and 25ft of 0 gauge Power wire. $68
now534 Posted July 10, 2010 Author Report Posted July 10, 2010 Recieved the power wire and hooked it all up. It sure hits hard off this Sony amp (freebie). Though the Sony amp doesn't like being ran at 2 ohms for a long time it still slams like no other for how much i've invested in it. Video Uploading right now
now534 Posted July 10, 2010 Author Report Posted July 10, 2010 Quality will improve once it processes the HD Portion.
now534 Posted August 8, 2010 Author Report Posted August 8, 2010 MidwestSPL hosted a show here in town today. I pulled a 141.1 out on the mic. Very happy for my first time on the mic.
now534 Posted August 25, 2010 Author Report Posted August 25, 2010 RF T1500.1bd installed its ghetto but it works great on these kenwoods. No stinky coils for me. Also this video was Pre-Big 3 i added a better ground and raised voltage up .4 volts need to order more wire and finish the big 3 up. And i would like to try and get a MLA and a higher output Altenator.
fecupe2001 Posted August 25, 2010 Report Posted August 25, 2010 I love kenwood subs, they get very well on the meter with small power, great build bro!! Just some numbers from Team Kenwood Latin america, here on Panama: All DB Drag scores (sealed on the dash, TL): 146.3 dbs with 2 10´s , 600 watts amp, single 0 gauge run, one battery, stock Alt 146.8 dbs with 2 10´s , 1200 watts amp, single 0 gauge run, one battery, stock Alt 150.3 dbs with 4 10´s , 2 1000.1 amps strapped, single 0 gauge run, one battery, stock alt I don´t remember the other numbers, but there´s a lot of monster scores over here with those subs and SMALL power I´m the SPL Gains topic creator!! wanna get louder?? check this: SPL Gains. Panamenian 2009 & 2010 & 2014 Bass Race 149.9 Champion! 2 15" subs and a 2K wired at 1 ohm, http://www.stevemeadedesigns.com/board/topic/167788-fecupe2001-2-15s-on-a-2k-video-on-page-3/ 8 Massive 15" subs and small power, http://www.stevemeadedesigns.com/board/topic/179296-fecupe2001s-8-15s-4th-order-bandpass-wall/
CheezyMane13 Posted August 25, 2010 Report Posted August 25, 2010 RF T1500.1bd installed its ghetto but it works great on these kenwoods. No stinky coils for me. Also this video was Pre-Big 3 i added a better ground and raised voltage up .4 volts need to order more wire and finish the big 3 up. And i would like to try and get a MLA and a higher output Altenator. Isnt that T1500 a little large for those subs. I mean it does like 1800rms @1ohm...How far you have it turned down? take baby steps, u cant do it all at once unless u have a roll of 100's big enough to choke a donkey 1998 Chevy Venture "Swagger Wagon" Kenwood Excelon KDC-X994 Headunit 3 15" Alpine Type R's in seperate T-Lines 1 RF T1500-1bd for 2 of the 15s 1 RF P1000-1bd for the single 15 3 sets of Hifonics Zeus ZXi6.5C Components( 1 more set to come for Front stage) 1 Hifonics HFi100.4 4-channel amp Stock alt for now (DC HO SPL 400A when funds come in,currently working on buying this) Stock battery and one Optima Redtop for now (looking at XS batteries) 3 15" Alpine Type R's (aka Swagger Wagon Build 1.0) Swagger Wagon Build 2.0 Youtube Videos
Recommended Posts
Archived
This topic is now archived and is closed to further replies.