Dbforlife Posted July 19, 2010 Report Posted July 19, 2010 when linking starter battery to a battery in rear seat. run 1/0 from pos. to pos.? or do i have to run 1/0 from both pos. to pos. and neg. to neg.? someone told me pos. to pos. with a 300 amp fuse in 1/0. but then idk i think i have to do negative aswell? if so, a fuse also? 1998 GMC Jimmy 4 Dr. -SINGER 275 Amp Alternator -150 FT. Of 1/0 OFC (8 runs) 4 pos, 4 neg. Front-back. -Audioque AQ2200D @ .5 ohm -2 Audioque HDC3 18's Tuned to 27-29 HZ -4 Clarion 6.5's -2 Optima yellowtops
TheAustinHenry Posted July 19, 2010 Report Posted July 19, 2010 Positive to positive, negitave to ground in the back, chassi ground Austin of AAAudio Our website
Dbforlife Posted July 19, 2010 Author Report Posted July 19, 2010 anyone? 1998 GMC Jimmy 4 Dr. -SINGER 275 Amp Alternator -150 FT. Of 1/0 OFC (8 runs) 4 pos, 4 neg. Front-back. -Audioque AQ2200D @ .5 ohm -2 Audioque HDC3 18's Tuned to 27-29 HZ -4 Clarion 6.5's -2 Optima yellowtops
Dbforlife Posted July 19, 2010 Author Report Posted July 19, 2010 Positive to positive, negitave to ground in the back, chassi ground okk, so i run 1/0 from postive under the hood to the rear seat battery positive. then run 1/0 from negative of rear seat battery to the chassi ground. right? PS i didnt think i had to run 1/0 from positive and negative of starter to pos. and neg of rear seat :L 1998 GMC Jimmy 4 Dr. -SINGER 275 Amp Alternator -150 FT. Of 1/0 OFC (8 runs) 4 pos, 4 neg. Front-back. -Audioque AQ2200D @ .5 ohm -2 Audioque HDC3 18's Tuned to 27-29 HZ -4 Clarion 6.5's -2 Optima yellowtops
MrSkippyJ Posted July 19, 2010 Report Posted July 19, 2010 anyone? The answer is right about you. Run a 1/0 wire between the + terminals, fuse each end and use your frame (chasis) as the ground. You can run another 1/0 for the ground but you don't have to. F150: Stock 2019 Harley Road Glide: Amp: TM400Xad - 4 channel 400 watt Processor: DSR1 Fairing (Front) 6.5s -MMats PA601cx Lid (Rear) 6x9s - TMS69
Dbforlife Posted July 19, 2010 Author Report Posted July 19, 2010 The answer is right about you. Run a 1/0 wire between the + terminals, fuse each end and use your frame (chasis) as the ground. You can run another 1/0 for the ground but you don't have to. k thanks 1998 GMC Jimmy 4 Dr. -SINGER 275 Amp Alternator -150 FT. Of 1/0 OFC (8 runs) 4 pos, 4 neg. Front-back. -Audioque AQ2200D @ .5 ohm -2 Audioque HDC3 18's Tuned to 27-29 HZ -4 Clarion 6.5's -2 Optima yellowtops
MrSkippyJ Posted July 19, 2010 Report Posted July 19, 2010 k thanks No prob, that was supposed to say above you, not about you. That was before I saw you responded also. F150: Stock 2019 Harley Road Glide: Amp: TM400Xad - 4 channel 400 watt Processor: DSR1 Fairing (Front) 6.5s -MMats PA601cx Lid (Rear) 6x9s - TMS69
splzx3 Posted July 19, 2010 Report Posted July 19, 2010 do power from front 2 back power and same for the ground ________________________________________________________________________ deepsilencer, on 22 Aug 2011 - 17:32, said: splzx3, on 22 Aug 2011 - 17:27, said: i had my fun on one of his videos...till he blocked me then i got my mother into it lol after her he closed the comments xD lol your mom is a G! WTF, I never thought I'd have a conversation about cross dressers and trans-genders on a car audio forum.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.