3 15" L7's Box Design - Willing to Pay For Design

[speedball1978]

ok .. 12.8 cu ft?? that seems a little small don't ya think...? lets extend the depth front to back a little and make it 15 cu ft....and only other problem is those ports would be shootin against the back of the seats,, blocking alot of air or interfereing with the ports.. either port has to be in middle if its on bottom or on the sides if on top

[speedball1978]

yea that design could work, looks sick (badass), but now if you do a angled port on one side you're gonna have to compensate the size of the port .. so if a 12x12 was square, then it would be like a 12 on 2 sides and 15 on one side and like hell i dunno guessing around 16, 17 on the other to make up the squareness

[Cynner]

Yeah man, I'm not going to stress over not having any room I just need more bass. That's all I'm worried about at the moment.

[speedball1978]

alrighty get your wood, start building lol

but since you're doing 2 ports, length has now changed to 6.5 inches each..

[speedball1978]

if you do round ports they would need to be 8 inches round 6 inches long each... if you do flared total flared port lenth 10.77 long each

[speedball1978]

shit i didn't realized the top half of that box was slanted as well now you're gonna have to extend the back some again.. lmao this gets better...excuse my sleepness

[speedball1978]

when you finish your build, hook me up with some 1/0 wire.. if you got any left over

[FreekDesignz]

depth extended 2.5in still 2 8in ports.

suggestions???

[Cynner]

I'll go with the original plan. With two ports but using your box sizes. Thanks for all the help bro. ;]

This was the orignal plan

Having both ports blowing excess air into the headrests

[FreekDesignz]

I'll go with the original plan. With two ports but using your box sizes. Thanks for all the help bro. ;]

anytime