Is this even possible? Box Building

[Carroot1]

Here fur all u who dont understand why it wont work

[Bumpin the TWP]

this is the best you'd get idk if the port area is too small tho, 36.75in^2

[Carroot1]

this is the best you'd get idk if the port area is too small tho, 36.75in^2

sorry the port is two wide. The only way we are going to have to build is to fit the triangle from our back seats to get the extra area so basically we will build it with one common wall,

just a question is more cu per sub better if you are under powering a sub?

[Bumpin the TWP]

yes use about 2.25 ft^3 per sub with lower levels

EDIT: or less

Edited October 6, 2010 by Bumpin the TWP

[Carroot1]

yes use about 2.25 ft^3 per sub with lower levels

EDIT: or less

does it hurt the sq by any chance or whats the problem with more cubic feet

[bassfiend316]

What about sub up/port back? I dunno what car, what you want, etc. so it may not work for you, just an idea. If everything won't fit on one side, use two sides lol.

Edit-bigger box with less power--more airspace means less cone control, so less power counteracts that. small boxes have better cone control, letting you overpower it and still be (somewhat) safe.

Edited October 6, 2010 by bassfiend316

[Bumpin the TWP]

does it hurt the sq by any chance or whats the problem with more cubic feet

I'm not sure... i always over power my subs lol

[Carroot1]

I'm not sure... i always over power my subs lol

im feedin about 450-500 rms each to my sa 12s which are underrated and can probably take 1k each and still be fine, but im not guna risk anything. Im guna build a box with zero common walls and ill let you know if 3 is the lucky number

[Skullz]

You could go with 2 4" pvc ports between the subs but not sure if its enough port area for those subs, will this box be sealed from the trunk?

The reason i ask is you can port off axis firing from the side into the trunk.

[Carroot1]

You could go with 2 4" pvc ports between the subs but not sure if its enough port area for those subs, will this box be sealed from the trunk?

The reason i ask is you can port off axis firing from the side into the trunk.

dont know what you said bro