im about to go ape $h!%

[Swaggasaur]

just using the dimensions from the other post.

would the ports have to come out of the box if the depth is 20 and the port length is 28?

[Skullz]

Port would be an L shape.

[cjvue]

port will come out of the side, obviously.

[cjvue]

Port would be an L shape.

The second set of inputs are for tube/round port.

[Skullz]

Sorry my photobucket is acting up and posting the wrong image so i went and made a direct link to it instead.

http://smg.photobucket.com/albums/v308/SkullznXBones/?action=view&current=Box.jpg

Edited October 15, 2010 by Skullz

[cjvue]

Skullz your photo came of fine from my end...

[Swaggasaur]

Skullz your photo came of fine from my end...

x2

[cjvue]

Swaggasaur, I just realize you can't do 13 height port if your boxt is 13 high. 13" high box minus 1.5" (0.75 top baffle and 0.75 bottom), leave you with only 11.5 hight of port. With port being 11.5 high, max port width is 4". Min width is 3". With 11.5"x3"x 26" of port, will give you your desire tune. But box will be too small, 2.76 ft^3.

If that's all the space you're willing to sacrify, I would recommend doing tube. take less cube for tuning.

[Swaggasaur]

Try 3 common port walls with the port dim. of

height-6

wide-4

length-11

tuning- 33.4

like this?

[cjvue]

like this?

that size port is too small for the box 24in^2. For every cube, you'll need between 12-16in^2 of port area. The Area range in the Speaker Box Tuning Calculator program will guide you. Your actual port area is calculated right below that.