BanginOnABudget Posted October 19, 2010 Report Share Posted October 19, 2010 (edited) everything up to now has been just little weekend projects, nothing serious by any means, 2 ma 15"s in a horrible box, 2 chambers 4.3cuft@32hz, rockford 1500 at 1.23 ohms, my electrical is horrible, but heres what i have so far. let me know what you think. Edit: head unit was 1/3 of the way up, far from the clipping point, i just didnt want the amp to go into protection again. bass on the h/u is on 0/8 and sub level on 2/8. Edited October 19, 2010 by BanginOnABudget Quote im taking out my passenger seat, battery is disconnected, going to unwire and take out the three amps, take out the 70+ lb box, then the platform so i can crimp 1 wire. Almost as bad as those fegs that put those horns in their grills and roll down the street distorting the block.... 1990 Jeep Cherokee 2 Dr. Big-3 in 0g on Stock Alt. Pioneer 6.5" and 5.25"s temp. until i can afford the new crescendos. Pioneer 6000ub Reciever NO amps at the moment. SA-15 on 1kw coming soon. MSG Me for a free enclosure design!! Flared port kits coming soon!! Link to comment Share on other sites More sharing options...
Slawsen Posted October 19, 2010 Report Share Posted October 19, 2010 I think you have other problems...110a alt and an extra battery should be FINE for that amp lol.. Sounds good Quote 00' Nissan Xterra Always under construction :] HU: Pioneer DEH3100-UB Mids & Highs: Kicker DS Component Set & Crescendo tweeters Mids & Highs Amp: Rockford 150.2 Subwoofer: 2 DC Audio LV 4 18"s Subwoofer Amp: Hifonics Brutus 2005d you been hanging out with jeff and dustin with that green paint? its yellow so it has to be loud. Link to comment Share on other sites More sharing options...
BanginOnABudget Posted October 19, 2010 Author Report Share Posted October 19, 2010 I think you have other problems...110a alt and an extra battery should be FINE for that amp lol.. Sounds good the wiring on the alt and batt are junk, i just ordered some knu 0ga so it should be night and day difference, i've heard the jeep on 14.5v and its easily 4x louder than it was in this video. will be another vid when the big 3 is done. Quote im taking out my passenger seat, battery is disconnected, going to unwire and take out the three amps, take out the 70+ lb box, then the platform so i can crimp 1 wire. Almost as bad as those fegs that put those horns in their grills and roll down the street distorting the block.... 1990 Jeep Cherokee 2 Dr. Big-3 in 0g on Stock Alt. Pioneer 6.5" and 5.25"s temp. until i can afford the new crescendos. Pioneer 6000ub Reciever NO amps at the moment. SA-15 on 1kw coming soon. MSG Me for a free enclosure design!! Flared port kits coming soon!! Link to comment Share on other sites More sharing options...
Slawsen Posted October 19, 2010 Report Share Posted October 19, 2010 the wiring on the alt and batt are junk, i just ordered some knu 0ga so it should be night and day difference, i've heard the jeep on 14.5v and its easily 4x louder than it was in this video. will be another vid when the big 3 is done. Yeah I wanna order some too, but halloween horror nights or 1/0? lol Quote 00' Nissan Xterra Always under construction :] HU: Pioneer DEH3100-UB Mids & Highs: Kicker DS Component Set & Crescendo tweeters Mids & Highs Amp: Rockford 150.2 Subwoofer: 2 DC Audio LV 4 18"s Subwoofer Amp: Hifonics Brutus 2005d you been hanging out with jeff and dustin with that green paint? its yellow so it has to be loud. Link to comment Share on other sites More sharing options...
BanginOnABudget Posted October 19, 2010 Author Report Share Posted October 19, 2010 (edited) but yeah, someone re-did the electrical for some reason, my alt + and batt - to engine are like 12ga wire. i cant even begin to guess why. all i know is i charged the batts up and went cruisin, decided to crank it at a light (i dont usually do that) and this lady gave me the finger, i know i can be loud, and when the amp pulls my voltage drops to like 11v or lower, its that bad. Yeah I wanna order some too, but halloween horror nights or 1/0? lol bribe your neighbor, steal his cat. $50 reward. Edited October 19, 2010 by BanginOnABudget Quote im taking out my passenger seat, battery is disconnected, going to unwire and take out the three amps, take out the 70+ lb box, then the platform so i can crimp 1 wire. Almost as bad as those fegs that put those horns in their grills and roll down the street distorting the block.... 1990 Jeep Cherokee 2 Dr. Big-3 in 0g on Stock Alt. Pioneer 6.5" and 5.25"s temp. until i can afford the new crescendos. Pioneer 6000ub Reciever NO amps at the moment. SA-15 on 1kw coming soon. MSG Me for a free enclosure design!! Flared port kits coming soon!! Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.