Fennygolf Posted October 29, 2010 Author Report Share Posted October 29, 2010 There is only three wires that make a hu work, 12V constant(usually yellow), ignition(usually red), and ground(always black). You messed with two of the three and then it quit working, that is where I would start....LOL problem 1 i only messed with 2 of the wires and it was the power to the radio and the ground from the radio nothing else was touched this volt meter doesnt have a remote turn on Quote Link to comment Share on other sites More sharing options...
Fennygolf Posted October 29, 2010 Author Report Share Posted October 29, 2010 There is only three wires that make a hu work, 12V constant(usually yellow), ignition(usually red), and ground(always black). You messed with two of the three and then it quit working, that is where I would start....LOL ok well we are narrowing the problem ALOT by testing it today my friend has the same headunit in his car so we swapped out the headunits and used IS wiring harness and the radio lite right up so obviously its in the wiring and i dont know whats going on with it i might have to just get a whole new harness cause where the guy soldered it the first time it horrible and was making everything stick out so ill do that next and update yall after that Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.