CaptainzPlanetz Posted November 9, 2010 Report Share Posted November 9, 2010 I was just wondering if the recommended box specs are about the same for the old Fi X 12's compared to the new ones, this sub is going in as a temp set-up so I will have a little bass. The box I came up with is 2.1 cubes after displacement, with 2 4" Aero Ports, at just a hair under 12square inches per cube, tuned to 36.xx Hz. It is for a single 12. Quote ¿ǝɯɐƃ ǝɥʇ Trolls never learn............ All BS aside, If I see one more comment in here that is NOT about the pre-sale, I will start the vacations. And that includes the trolls feeding the trolls. YOU THE ONE THAT SOUND LIKE A OGER AND HUMPBACK/TROLLS? Add "SMDLIFER" on Xbox LIVE to play with other SMD members. Link to comment Share on other sites More sharing options...
tristan560 Posted November 9, 2010 Report Share Posted November 9, 2010 No sir...box specs are different i do believe. How much power are ya puttin to it? Quote <u>99 Jimmy SLT 4WD</u> Systemless. <u>99 Grand Prix GTP</u> DC XL 12 on 1.5k tuned lowwwwww. Link to comment Share on other sites More sharing options...
CaptainzPlanetz Posted November 9, 2010 Author Report Share Posted November 9, 2010 (edited) No sir...box specs are different i do believe. How much power are ya puttin to it? I have two amps that I have laying around one does 300rms @ 2ohms and the other does 600rms @ 2ohms. So really I can use either. Edited November 9, 2010 by CaptainzPlanetz Quote ¿ǝɯɐƃ ǝɥʇ Trolls never learn............ All BS aside, If I see one more comment in here that is NOT about the pre-sale, I will start the vacations. And that includes the trolls feeding the trolls. YOU THE ONE THAT SOUND LIKE A OGER AND HUMPBACK/TROLLS? Add "SMDLIFER" on Xbox LIVE to play with other SMD members. Link to comment Share on other sites More sharing options...
tristan560 Posted November 10, 2010 Report Share Posted November 10, 2010 Sending you a pm. Quote <u>99 Jimmy SLT 4WD</u> Systemless. <u>99 Grand Prix GTP</u> DC XL 12 on 1.5k tuned lowwwwww. Link to comment Share on other sites More sharing options...
fi car audio Posted November 10, 2010 Report Share Posted November 10, 2010 By far close enough. While TS params are a little different, the boxes used for them are very close. Really the boxes used for all 12" Fi drivers are interchangeable. A 12" BTL in 2.1 cuft tuned to 36 would work... for a Q or a BL as well. Just that its not as SQ oriented for the Q as tending towards the lower side of our recommendations and would have a little more punch with a BL or BTL. Should do fine for an X12. Thanks, Scott Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.