pstone11 Posted November 19, 2010 Report Share Posted November 19, 2010 Universal Window Kit So, does anybody have experience converting manual windows to power? I need to rebuild my doors and door panels and would like to not have a window crank anymore. It's on the sausage, a 93 Sonoma. While I was at it, I wouldn't mind doing power locks as well and integrating a newer alarm.. I have a couple vipers...a 5701 and something else. I could go ahead and shave it too, no problem.. I was looking at the above kit... I don't mind going more expensive, but I couldnt find anything that looked much better.. I looked at autoloc, and a couple other sites too. Quote Check out StoneSounds to see my recent builds.Or look at the Flying White Facebook Page! Link to comment Share on other sites More sharing options...
cOmpressor Posted November 19, 2010 Report Share Posted November 19, 2010 Well I've done a few cars and trucks in the past but I've always used OEM parts. You can go to a junkyard nearby and pick up everything you need from a truck like yours. Motors, relays, switches, mouning brackets, and even door panels. I don't know your truck that well so I'm not sure it's a direct swap but every Honda or Toyota I've done was. Quote Link to comment Share on other sites More sharing options...
pstone11 Posted November 19, 2010 Author Report Share Posted November 19, 2010 Well I've done a few cars and trucks in the past but I've always used OEM parts. You can go to a junkyard nearby and pick up everything you need from a truck like yours. Motors, relays, switches, mouning brackets, and even door panels. I don't know your truck that well so I'm not sure it's a direct swap but every Honda or Toyota I've done was. It should be a direct swap but junkyards are tough out here and it is even hard to find s-10 parts on craigslist... I still have an ear out, but want to keep my options open. Quote Check out StoneSounds to see my recent builds.Or look at the Flying White Facebook Page! Link to comment Share on other sites More sharing options...
casto27 Posted January 21, 2011 Report Share Posted January 21, 2011 Universal Window Kit So, does anybody have experience converting manual windows to power? I need to rebuild my doors and door panels and would like to not have a window crank anymore. It's on the sausage, a 93 Sonoma. While I was at it, I wouldn't mind doing power locks as well and integrating a newer alarm.. I have a couple vipers...a 5701 and something else. I could go ahead and shave it too, no problem.. I was looking at the above kit... I don't mind going more expensive, but I couldnt find anything that looked much better.. I looked at autoloc, and a couple other sites too. I've done a lot of converting from manual to auto Windows amd locks. The kit I use is spal. Motor is quite and works very well. Crimestopper has some cheap door lock actuators that I use. U can get a dei451 m which is used to wire up the door locks. Or if u are familiar with hooking up relays u will need 2 and wire it 5wire. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.