fi audio Posted November 27, 2010 Report Posted November 27, 2010 right now i have a fi bl 12" on a audioque 1200d im either going to buy a fi btl 12" and still have a single sub setup with a audioque 2200d or im going to buy another audioque 1200d and another fi bl 12" what would be the best as in get the loudest. Also what electrical upgrades will be needed what alt and how many xs power d3100's Quote Setup: Headunit: 7" indash screen Sub: fi bl 12 Amp: Audioque 1200D Box Ported tuned to 34hz Big 3 done in 1/0 gauge
__d_a_v_i_d__ Posted November 27, 2010 Report Posted November 27, 2010 (edited) compare the obvious. 1 12" on 2200watts. VS 2 12" on 2400watts. more cone area and more power wins. just make a good box EDIT: a 200amp alt is good with upgraded front and 2 batts in the back is more then enough. Edited November 27, 2010 by __d_a_v_i_d__ Quote Chevy Impala Shocker Sigs / TC Sounds 12s Sundown NS-1 | SAX 100.4 Sundown Neos | Dayton Audio Neos ETCCC ETCCC ETCCC My YouTube ---- Subcribe!!
DCmagnum Posted November 27, 2010 Report Posted November 27, 2010 x2 Quote ="Impact"] pioneer 4200 dvd 4 sets aa carbon mids 2 sets rockford power t1 tweeters rockford power t400.4 rockford power 4inch DC 175.4 DC 3.5k (soon to be 2) 2 DC XL 15s The artist formally known as willie3719
Socky Posted November 27, 2010 Report Posted November 27, 2010 i would do another bl, and another 1200d. Prob 2 batteries, so no voltage drop. Quote Jeep Cherokee 4dr -4.75 in front, new rusty's 4.5 in rear leafs -micky thompson 35x14.50x15 -locker rear -Rusty's offroad Engine/transmission/transfer case/crossmember/gas tank skid plates -Warn front bumper with 8000lb winch -Custom rear bumper -Warrior product tube doors (summertime) -Optima redtop (starter) -26XK miles and still runs like a bat out of hell Kenwood H/U 1/0 wire, 136 amp alt 200 ah batteries 12.7 daily 2 Apsm 1500 @ 2 ohm strapped on zv3 d1 with ns softparts Mb quart 125.4 wired to 4 aura 6's 3.6 cube box tuned to 36 plays down to 23hz
EricR Posted November 27, 2010 Report Posted November 27, 2010 2 12's Quote i was thinking leave the 12 sitting in the box in the hole and duck tape from the bottom of the sub to the bottom of the baffle so the sub doesnt free air. would that work?
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.