nickpearson Posted January 29, 2011 Report Share Posted January 29, 2011 I am looking for a socket cap type wood screw to use when mounting subs. Does anyone know of a source? My Build Fi BTL 12 Fully Loaded Optima Batteries DB Drive amps,and mid/hi's Pioneer Head unit Link to comment Share on other sites More sharing options...
bumonskateboard6 Posted January 29, 2011 Report Share Posted January 29, 2011 http://www.mcmaster.com/#socket-head-cap-screws/=at0qwz Current Systems: 2011 BMW 335i Hertz HDP1 DC LVL3 12" Full Carbon Fiber 2002 Acura TlKenwood DNX9980HD2 DCLVL4 12" Subs with LVL5 Parts D.7 CoilsDC 3.5kHertz HSK-165 up front HCX-165 RearHertz HDP4 AmpDC Power Engineering 260 Amp AltBig 3 and amp powered with KNU 1/0XS Power D2400 Up Front i pulled out my dick in class many of times and had it shown. get over it bitch...stupid open legged hairy beavered bitch... going over rms = smaller box, under rms = bigger box... Low voltage doesn't blow amps. That's a myth. A router that does the sub holes makes rounded edges also? Link to comment Share on other sites More sharing options...
cOmpressor Posted January 29, 2011 Report Share Posted January 29, 2011 Also I found the #10 3/4" self tapping screw works great. Drill the holes and don't use the self tapping part for that but the coarse thread and large size works great for speakers. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.