lowsound10 Posted January 31, 2011 Report Share Posted January 31, 2011 Im going to buy the Audiopipe 1000d and a DC level 3 maybe with 4 soft parts not quite sure. but should i get d2 or d4 coils. if i get the upgrade then im sure i should do d2 right? if not the amp puts out 700rms at 2 ohms and i heard these do rated. if im wrong correct me. but any advice would be appreaciated thanks Quote Vehicle: 2008 Mustang V6 Exterior: Blacked Out Taillights, Turn Signals, Side Markers-Black 18x8 Enkei ls5-6000k HID's Interior: Blue LED Strips with Module for Music-Hardwired Beltronics RX65 with Blue LED and remote button Sub: 2 10 inch custom subs Amp: Hifonics BRz 2600 Wire: Knu 0 gauge Headunit: Kenwood kiv-bt901 Damplifier: Fatmat Rattletrap Electrical: Stock Alt/Stock Battery/Big 3 Link to comment Share on other sites More sharing options...
zayres29 Posted January 31, 2011 Report Share Posted January 31, 2011 im not sure about the 1000d but i thought the audiopipe amps werent stable at 1ohm Quote Btw that was the first person. Ever banned by me while dropping a deuce. Feel privileged Link to comment Share on other sites More sharing options...
lowsound10 Posted January 31, 2011 Author Report Share Posted January 31, 2011 it says they are stable at 1 ohm Quote Vehicle: 2008 Mustang V6 Exterior: Blacked Out Taillights, Turn Signals, Side Markers-Black 18x8 Enkei ls5-6000k HID's Interior: Blue LED Strips with Module for Music-Hardwired Beltronics RX65 with Blue LED and remote button Sub: 2 10 inch custom subs Amp: Hifonics BRz 2600 Wire: Knu 0 gauge Headunit: Kenwood kiv-bt901 Damplifier: Fatmat Rattletrap Electrical: Stock Alt/Stock Battery/Big 3 Link to comment Share on other sites More sharing options...
dugee81 Posted January 31, 2011 Report Share Posted January 31, 2011 im not sure about the 1000d but i thought the audiopipe amps werent stable at 1ohm you are thinking of the 3000 watt model, which is two 1500's in one casing. Quote 200a alt. by Excessive Amperage hc800 under hood & 2 Deka 9a31 in rear 1/0awg + big 3 SAZ 3000D HDC3 18" @ 2 ohm Link to comment Share on other sites More sharing options...
Emoxihax Posted January 31, 2011 Report Share Posted January 31, 2011 (edited) my ap10001d is stable at 1 ohm. get a d2. my fi bl d2 loves the 1000 watts at 1 ohm Edited January 31, 2011 by Emoxihax Quote 2004 Volkswagen GLI 1 10" Skar VVX ^^^ Looking for an amp to run it, Pm me if you have one ^^^ Link to comment Share on other sites More sharing options...
lowsound10 Posted January 31, 2011 Author Report Share Posted January 31, 2011 ok i was thinking the d2. i just didnt know if there was any difference or if its alll jus for wiring purposes Quote Vehicle: 2008 Mustang V6 Exterior: Blacked Out Taillights, Turn Signals, Side Markers-Black 18x8 Enkei ls5-6000k HID's Interior: Blue LED Strips with Module for Music-Hardwired Beltronics RX65 with Blue LED and remote button Sub: 2 10 inch custom subs Amp: Hifonics BRz 2600 Wire: Knu 0 gauge Headunit: Kenwood kiv-bt901 Damplifier: Fatmat Rattletrap Electrical: Stock Alt/Stock Battery/Big 3 Link to comment Share on other sites More sharing options...
zayres29 Posted January 31, 2011 Report Share Posted January 31, 2011 you should be good then get the dual 2 coils Quote Btw that was the first person. Ever banned by me while dropping a deuce. Feel privileged Link to comment Share on other sites More sharing options...
lowsound10 Posted January 31, 2011 Author Report Share Posted January 31, 2011 alright thanks guys one more question though. is it really a differrence or is it all for wiring purposes? Quote Vehicle: 2008 Mustang V6 Exterior: Blacked Out Taillights, Turn Signals, Side Markers-Black 18x8 Enkei ls5-6000k HID's Interior: Blue LED Strips with Module for Music-Hardwired Beltronics RX65 with Blue LED and remote button Sub: 2 10 inch custom subs Amp: Hifonics BRz 2600 Wire: Knu 0 gauge Headunit: Kenwood kiv-bt901 Damplifier: Fatmat Rattletrap Electrical: Stock Alt/Stock Battery/Big 3 Link to comment Share on other sites More sharing options...
zayres29 Posted January 31, 2011 Report Share Posted January 31, 2011 just for wiring Quote Btw that was the first person. Ever banned by me while dropping a deuce. Feel privileged Link to comment Share on other sites More sharing options...
fmedina Posted January 31, 2011 Report Share Posted January 31, 2011 (edited) Oops Edited January 31, 2011 by fmedina Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.