DollarBill1

Thanks for the help guys. Yes these batteries have been in the same bank and charged every couple of weeks. My concern was that my truck has been parked a few weeks and when I turned on ignition before starting my SMD VM1 was showing my voltage at 11.6-12 even after a charge but running it was showing 14.7-14.8. Put a DMM on all my batts today and they show 12.8 and the vm1 is at 11.8 so I think the vm1 is faulty.

I have a PSC15 on 4 batteries and I was wondering if I have to disconnect anything to use the recovery mode or is it ok to leave everything hard wired?

My sister has MS I'm definitely in.

So if I have 2 D3100's and 2 D4800's to charge would you recommend the 15amp or 30amp?

Orion 222sx back in 90-91 I think on two Pyle 15's.

Awesome! Thanks Jacob that's why I'm a loyal Sundown customer.

You can run one Nightshade V3 18" if you have the room.

Which do you think is better to get products through?

I ordered mine on the 16th of last month and was told they should be about another week or so. I can't wait to hear them bad boys!

I have the one shirt that is available on the Sundown website but where can I purchase the ones that used to be there and also maybe key chains, dog tags and such.

Thanks Jacob. I can't wait to get these in and hear them!

First off post in the right section with your own thread and not on someone else thread. Then maybe you will get some answers. I know your first was to Jacob but that's still not what this thread is for so post up your own thread and see if you can get some answers. Secondly, and this is the more important one to me (also I'm not deliberately trying to be a dick) but who the hell spends $4000 dollars on stuff that they don't know what to do with or how to use it. I'm thinking maybe you should figure out if it will fit you application before you buy. I mean $4000 into it and you are just now asking what to do. If you wanted a wall you should have figured out what your electrical can handle, how much space you are dealing with, how much power and electrical upgrades you need and then start looking into subs. Anyway, make a thread and ask there, in the right section or nobody will answer anyway. Also Jacob is a busy man. He does his job well, but understand that replying to you on this thread is not his job. Your box isn't his problem, but he is awesome and he and his company have great customer service so he does reply when time permits just because that's what kind of dude he is. Does his job plus some. Now that I'm over that, I wish I knew more so I could help. When you make a new thread be sure to give all the info you have. What type of car and subs and amp... Measurements if you can get them. Tell us about the power you are running and the electrical you have. I am fairly certain that if you do make a thread with this info, someone will end up being very helpful. I'm just not that guy. First off other people can ask about specs for these subs on this thread but I can't. Who else would know what's best for these subs than the guy who built them that I purchased them from? And I do know what to do with them and it is all planned and electrical is done so if you didn't design and build my subs. BTW these are a brand new sub he has and I know basically what to run but I wanted his input. Thanks for the help though.

Well I have spent just under $4000 on Sundown products in the last couple of weeks does anybody have suggestions on my setup?

Ordered 2 18's and told the ETA is about three weeks. What do you recommend Jacob as far as cubes for a wall and what tuning. It will be used as a daily driver so mostly just on music.

I have a NS-1 V2 and I'm fixing to order 2 Nightshade V3 18's and a 125.4 next week so if you wanna pop a set of NS-6.5cs's in there with them I'd give $700 for a set.

I have been looking and I haven't seen any nightshade v3 18's on YouTube or anywhere like that yet. Are they not in production yet?

Yes 3100 is 110ah and 7500 is 140ah

Ok as far as three 3100's would I be better off with one D7500 it would take up a little less room and be a little cheaper.

Ok as far as three 3100's would I be better off with one D7500 it would take up a little less room and be a little cheaper.

Ok as far as three 3100's would I be better off with one D7500 it would take up a little less room and be a little cheaper.

Three 3100's and two 4800's wouldn't that kinda be much for one NS-1? How many runs of 1/0 do y'all suggest?

I am planning on a wall with two Nightshade V3 18's. I already have my NS -1 V2. This is going in a 09 Chevy 2500HD so for batteries I'm running two XS D 4800's under the hood and planning on one XS D3100 in cab. Talked to Singer and probably running a 320A 6 phase. This is gonna be a daily driver and will prolly never compete so I am wondering if this will be enough electrical to run the NS-1 at 1 ohm. Also I have been advised to run the box at 16 cubes at 40hz. Thanks for any advice or input.

Planning on having two D4800's underhood

I'm planning to run a NS-1 on two walled ZV4 18's. Thinking about a running a DC 320 amp and I'd like input on size and number of batteries. Preferably XS batteries. Already planning on replacing my 2 stock batteries under hood with XS D 4800's.