chewie

a good portion of team deadly hertz will be at the all truck nationals.. it was a SWEET time last year

plannin on starting it as soon as i feel comfortable enough where i wont be chasing boxes. i know i will have to build a few.. thats the name of the game but somone on here. has to know if what i described above will remotely work. im thinking im gonna stick with the 3.5 cubes. just use round port.. and try sub up and sub forward and sub back. please somone tell me if im going the wrong direction with this. i also plan on filling any bracing gaps/voids with great stuff foam.. i will also be buying at least one layer of deadner for the roof and back quarter panels. and gotta figure out a way to stop the rear hatch http://s196.photobucket.com/albums/aa295/stclairriverblaster/car%20audio/?action=view&current=DSCF0337.flv the side windows also flex out about 1 inch and release a ton of pressure even with the windows down. but duct tape can fix that.

sine sweep.

ive ran my old 06 brutus at .5.. after box rise it should be fine. even if it smokes. i only paid 150 for it.. the woofer is a dc level 4 with level 5 coil and spiders.

THE power im gonna be working with is sad.. hifonics brutux bxi2008d i will have strong electrical though. and will be wiring to .5 ohms.. if i can get sonotube in 7 inch thats the magic number i need i will start a 13 inches for a 40 hz tune.. then cut down at half inch increments till i find the sweet spot.. heres the bugger.. that 16 inch box height is a cunt hair away from being above windowline. if i build the box 16hx16dx26w thats 2.8 cubes after displacement. and i will be able to test sub up sub forward. or sub back. and still be in the window line compliance. and will be able to use a 6 inch port will start at 12 inches for a 40 hz tune and do the same work my way down.

i would go kenwood over that pyle anyday.. but then again i probably wouldnt buy either

what car? fold down seats? dimensions of opening behind seats..

i would do a 3100 up front and a 2700 out back.

it was titled a sanger.. but that mold was a whore back in them days.. i think that hull was made by 10 diff manfs

nice!! i have a soft spot for jet boats.. although im a outboard fan myself. not a jet boat but a boat i helped build and my two summer toys.. yellow 61 gps..

neo.. i chose 48 because i figured this car would peak around 50 or so.. neo ygpm

i havent had much luck finding anything bigger than 4 inch pvc and i dont have the skills to router out the rings to build a wood port and with the square i can build bolt in exchangeable ports..

hey guys.. i want some input on this subject.. i have a single 15 that i will be using for the street b class i will be building a burp box and was wondering what would be the best way to go about this.. heres the car.. now.. the way i was thinking was sub facing forward on the passenger side.. in line with the meter and the port out the side facing the rear drivers quarter panel.. the sub has a straight shot to the meter with the front seat reclined.. yes it reclines almost horizontal. heres the box i had in mind. 3.4 cubes tuned to 48.7 hz or would i be better off doing a different design..

gibralter of taylor michigan.

oooo a 240 hatchback.. single 15 4 cubes tuned to 30 hz...

pint of 151 to get smashed.. then any remaining liquor thats around to get me shit faced..