RHoughton1

I Purchased a Charger from him and arrived in perfect condition,within two days..Thanks

Thank you very much,My charger arrived today,looks brand new in packaging.And very Fast Shipping. Thanks again.

I have sent you the payment first thing this morning, Did you get it?

I would check fuel filter cuz its cheap,but I would guess the pumps bad.I know the pump uses the fuel to cool the pump so if you run low on fuel you will eventually burn it up.Check current draw on the pump wire.Btw check the ground wite on the fuel pump that would cause the fuse to blow.

PM replied

I'm willing to trade for Kinetik 16v batts or a headrest monitor.

Here's 4 DD 12's http://www.stevemeadedesigns.com/board/ind...showtopic=24246

The subs only come in single 4 ohms. I'll get pics of the motors tomorrow but they are similar to the 512's. and no I do not have the end caps,for all of them I just have on set.

I believe it is 600 rms but I have heard of guys running 1000 clean to them.

I am selling 4 used DD1012's , 1 Alphasonik PMA1200d , 4 kicker ZR240's , 1 kicker 460 , 1 Audiobahn A4004T, I also have 4 links to link the amps. I am asking 100 each for the subs 325 For the Alphasonik 100 each for the Good kicker ZR240's 100 For the Kicker ZR 240 and Zr460 Non Working 15 each For the Links Sorry not looking for trades at this time But I'm open to offers.No low balers Please.

Now it works

This album is private. Please login Still Doesn't work

By any chance did you hook to the solenoid. and do you have a capacitor or battery in the back. If so you just back fed into the starter.

Yea thats about right.yea it was a 10.Dual 2

It's all good I just thought there would be alot of haters. you know non believers. Thats why i dont like posting on these forums but I understand andy one can get a picture online and say it's theirs. And yes I got it from Lousiana_crx. and sent it back from DD to have it made to a 18" dual 1ohm extra stiff spyders. And they removed some structure for exta cooling but i have to remove the mag shot DD doesn't like it floating around.

I'd buy a new monitor then

I compete in MECA and the first show around here is the 12th, and I'll only have one amp in by then. But I'll let you know. Our scores are measured at the head rest.

No its for Daily and comps. Its ported thru the back window of the truck.

So here's the specs 1994 Chevy Truck Here is the Tunnel I built Last year It's 3/4" square Stock Steel 10 GA. 2 Sheets 3/4 MDF thick all Resined and the joints were fibreglassed together. Here's the sub 99z18 I don't have the amps yet but I noticed they will be shipping them. Next week so here's a pic from the site So onto the buld, Heres the Shelf I built And here is the Port inside wall. and here is the Sub Mounted on the shelf And next weekend I'll build the Rear wall which will slide back and forth so I can tune the box however I like. One position for Daily and one for comps. I'll just unbolt it and move it to adjust the port width.

Yea SKS has got to be the greatest gun made, cheap to shoot and cheap to buy. lol I buy ammo by the 1000 rounds never have too much. lol

And my safe in my old house

I know chevy trucks have them tucked under the fender.on the firewall.88-98 that I know of.

Or you can do this. 4-12's

http://www.alsacorp.com/ Heres the company its alsa not alsop