doubleD

im glad to see that other people are getting sick off the crapy comments on here,,,hope you get what you need

dude ive been wondering the same thing,,can you just split the same type cable from your knob and take the two same cables to the amps,,my knob has 6 pins

i lowered my 01 yukon 2" all the way around,,but when finished it was more like 3 - 4 drop,,i just put on shorter belltech nitro 2s,,but they dont seem to be heavy dutty enuff to hold the weight

sweet, where do you get that foam,,,that stuff isnt the same kind of foam you can get at wal mart is it

the back is done in deadener,,,no foam.is there something to put on the back of interior panels

01 yukon with 4-18s.. what is the best thing to do to keep those panels quiet,and the hatch from flexing so much,,,the back wiper wont work and the hatch window wont open,,,what are some good interior deadening tricks, and for overhead consoles

how much of a drop was your kit, and what did it consist of

stock right now,,,the back dont look that low,but the 2" keys did a lot

i have a 01 yukon 4 wheel drive,just put 2" keys up front, 2" springs in rear,front dropped alot,other than rolling fenders,what else needs to be done for clearence issues ,i have 305/30 26,,,,

so why do the back two look ok and the front two dont

when i video my subs at high power and play it back in slow mo, some of them wobble and some dont,,could this be due to cross bracing in the box,,,,or to not having any 45 angles.. the back two 18s move up and down, but the front two wobble

i was just looking on scorpions web site and saw they had some for car audio,,, i would have one 200 amp breaker in front of each amp

will a 200 amp circuit breaker work as well as a 200 amp fuse for an amp

why would you film it at night

i made a new panel to fit in place of the bottom interior panel on the back hatch of my yukon,,,it was 1/8 inch thick an double that where tha ports are on my box,,,finished it out with some fiberglass to smooth it out and painted it,,, if its to heavy the hatch wont hold itself up

my box is alot like meades box,,4 18" subs ,,alot of bracing on the inside and double baffle on top,,,just not as much fiberglass

gotcha,,,thanks for your responce

just got four new AQ2200 amps,,, and im wondering if its a good idea to mount these things to the front of the sub enclosure

for, four , duel 2ohm subs,,

well the main reason i didnt tie them in was,,,that i wanted to avoid the whole headlight and interior light dimming thing

so maybe two more batts

well the stock alt isnt seeing any load other than the truck,,,,but the 240 amp alt is only seeing the system,,and thats where the two 1800 batts are

then i would need 1 amp for all four,,wouldnt be enuff power,,,or four of the amps,,i can only afford two for now,,, i have four duel 2 ohm subs

if i dont have the electrical system to support it ..what will help,,,more batts or what i have duel alts,,, but my stock alt is just running my truck,,,the other 240 is just for the subs