bjfails

Here's some more pics of the trunk finished off:

Here is a build in progress for our Team just thought I'd post up some pics. Still in progress will have pics up when get amps installed.

I want to understand you correctly, you're spendin 130 on 4 6" areos?

Personally I like the HK series much better they have a better STN ratio and normally lower THD ratings and the fact you can get it cheaper is just a bonus.

Dual 2 ohm or 4 ohm?

Sure, no prob

Naw I have never had to send one back under warranty, just the occasional DIY bad install that needs repaired. mostly hooking up in wrong loads, "I thought you just run all the positives and negatives together" meanwhile putting in .25 ohm load on 2 ohm stable amp?

Man I run the X493 and it is absolutly worth and every bit of the extra cost. The features are outstanding for comps, easy sub level control, and the only unit in the price range that I found would do 10hz steps on the freq controls. Plus comes with a 3 channel crossover control and will drop down to 40hz. The 2 stage bass boost was a nice touch from the previous years X492 (That I used to run) Only thing I do not like is the presets are gone, now have a favorite feature that I don't care for, but I don't listen to radio much. Just acquire mp3s from web and use on USB.

Just passin on what I was told

They made some good amps, just a word though I'm a retailer and was told they may be goin away due to the times. May have warranty issues later.

Dude I tried MECA and unless they showed on my door step to do a comp I would never run one of their again. Here's the basic skinny. They sound great take total fuse and multiply by 10 the add to cone surface area right.........Not quite, Say you run a 6000 - 8000 watt system run around 250-300 amp fuse. times 10 2500-3500 right? Well what they'll actually do is in that system run a 50 amp fuse, yes 50 amp. You'll blow it but oh well you'll get at least 3 seconds, that is what the judge told me. I was like WTF that is freakin retarded. Oh and fuses have to be within 18 inches of amps not under hood. Which is fine just preparing you. All measurements are in the passenger seat at head rest, not bad closer to legal. I just was floored by the fuse issue and couldn;t belive what the judge told me.

I would say sealed on those subs if you're wanting a musical vehicle. I don't think the X-Plods will sound well in a ported box. Make sure to fill box, if sealed, with aboust 50% stuffing will make for a cleaner sound.

Read article: Guys beats his 6 year old kid because he sucks at video games. This is Wacked

Dude, don't wire that way veryyyyyyyyyy bad things will happen. All the magic smoke will come out. You're not goin to get 3 of those subs on 2 amps unless 2 on 1 then 1 on 1, Heh Heh 2 on 1.

Here's a link to buy Audiopulse

We have 5 kids and lots of people over and wife wanted a big Breakfast nook against the wall so here is what I built: It will seat 13 if it has to: Table is 5ft X 5ft and bench is 6ft

Dude there is no set way to break in subs, you'll get lots of good advice and but that's just what it is. ADVICE. You can take an awsome high-dollar sub n might not need anything. Then get ya a lightning audio from wally world and run it of the head unit and needs days, still never sound good though. Just do what you feel comfortable with and if you smell smoke should have turned it down a little sooner. I've taken subs right out of the box at a comp and gave them hell and no probs. Again I've taken a sub and given it half volume for a month and SMOKE. Just play it and have fun with it quit stressin.

Dude I would not go with GP I have a multiple 1st place vehicle and was running GP2350 on a single sub and sucked. As far a what amp to go with check out Soundstream's new TRX amps. I am sponsored by Soundstream and have a complete Soundstream vehicle, but also check out US Amps, Cactus sound, TREO, or even HiFOnics (and yes I know HiFonics is the same company as Crunch, but HiFonics makes a higher quality amp). Remember the higher the ohms the less the distortion, 4 ohm better than 2 ohm. That is the biggest advantage to two seperate amps or one single amp.