Crump

Got some cardboard laid out to keep some of the shit out of the trunk. Comin along Cloth laid out Resined Top on then resined Bolted up They should be putting this beast in very soon Big Three I had never used welding wire before but it came out pretty well. Still have a battery box to build along with an amp rack, but I see this beng done within the next week. Thanks for looking

So This box is for a Cascade design 15" The 60+ pounder and it has to be built in the trunk. I have never done it before but I planned pretty well and I think itll work out really well. Kreg Jigs ftw Building it Thursday while the glue drys ill be doing the Big 3 for him also. Excited for this project.

I would listen to Mlstrass, he built one of the sickest walls I have ever seen and he knows what hes talking about.

So what 5/16? or 3/8? just wondering i may need to change up my batt box.

Selling my Kinetik 1800 to Slapuhho and I just ordered my XS Powa D2700 from Mechman. I cant wait to see this beast, any know what size bolt comes with the batt? 5/16 or 3/8. LET ME KNOW. im pumped, but I havent been drinking green tea all day.

You need a torch, 60/40 rosin core colder, and a clamp/pliers to keep the wire in place. Just heat the back of the terminal for 15-25 seconds then just push the solder into the other side of the ring (where wire is), and just keep doing that, the wire should pull the solder down into the wire, if it doesnt just heat the ring a little lower cuz the solder goes where the heat is. Then let it cool for a minute, then what i do to cap it, is cut a good amount of wire wrap it a small tight ball and put that on top then just heat it and it usually caps it pretty good. Maybe this isnt the best way but it works for me. Pm me if you got any ?s

I learned by hanging out at my REPUTABLE local shop and asking ?s over there, watching them work, and then eventually trying myself. I definitly learned how not to do a lot of things which isnt bad so to say, but the biggest thing I learned from this forum is soldering. I always solder 1/0,4, and 8 gauge this way you dont have to worry about a connection coming loose because of a bad crimp that wouldnt survive a pull test. Dont be afraid to invest some money in tools, having the right tool for the job saves you from having to stop midway through doing something. Hope this helped.

Why cant you just run one y splitter to one amp, then run a set of rcas from that amp to the other? and you can ground the amps at the battery if you want, but the chassis works fine also. Then you gotta fuse the amps within 18" of the battery or closer. Also with your remote turn on wire you can just run one to one amp, then daisy chain it to the other like the RCAs. Pm me if you have any other ?'s

I bet it would be louder if you didnt seal it off from the trunk so much. Like it takes up the entire opening.

wanting to purchase a RF logo cut out of .5 inch mdf or something easily paintable. http://t2.gstatic.com/images?q=tbn:fS_G0Md...fordFosgate.jpg ^^^^ that, if you pm me ill give you demensions n all that jazz.

gain way too high in order to make it seem louder off of 250 watts? cuz that makes no sense, I had a T-1000-1bd on my sub and i only dropped .3 volts

Hopefully my local shop does it for that price, I only need it for my front two doors idc about the others. I really want trunk popper too, Im assuming thats with an actuator too, I'm gonna call them tmm.

No powerlocks. Cars stock stock

One side was completely defrosted because it was on the side with the sun, and the key works it just wont get all the way in so I can turn it. I try to wiggle it, breath heat on it, I used the spray that my manager had, no go. That shit would cost a lot, lol I make decent money @ age 18, but I cant afford the 100 dollar an hour Ford Service. And my car only has two keyholes, in the two front doors.

Well I got off work (12:00 P.M.-11:50 P.M.) so almost 12 hrs and im tired as shit and just wanna go home. I attempt to put my key into the keyhole, no go. same on the other side. So I cant get into my car, I end up having to wait 15 minutes in20-30 degree weather for my dad to come pick me up, and I have a cold that I have been getting over it and now im congested and feel shitty again. Its Fucking annoying that this happens, because the car is only two years old. So Now I have to leave my car overnight and worry about something getting stolen. Shits rediculous Can I have this checked up on under warranty? because that little spray doesnt work, and I have taken the panels off, but Never messed with the locking mechanisms. Please just tell me what I can do.

Pretty sure its a particle board of some sort because in one of the pics it says floor underlayment never seen that on mdf panels that I have used.

get like 30 sq feet and make sure you clean everything first so it doesnt come off in the future

If you do it correctly and take your time, it should help you out a lot. But if your going to do it buy some decent material, I used some shitty stuff and am replacing it with second skin and I have to tear out all of my old deadener. lets just say it will take days of work to get it out

I only buy materials from ebay not equipment. i.e. Wire, solder, glass cloth etc But thats just me, I would rather buy something from someone on this site than use ebay

Two ?'s are you sure that is MDF, cuz it looks like particle board of some sort. What do you mean a 4k system? like 4000 dollars or 4000 watts or what?

Can you get me a hookup on a 1/0 power kit? I just bought the cheapest ones i found on ebay lol. pm me about the 1/0. Thanks

Preferably the dual twist (premiem) or the regular, Thanks guys pm me.

Phanny pack ftl nice....

Ant said thats a no go, applying over it wont really help.

I have some old raamat that I am removing to put some second skin on and Im just wondering is there any trick, or just force? Thanks