Crump

I will be using bolts for the speaker wire, ( never done it before)meaning wire with terminal on inside, and wire with terminal outside, the box will be carpeted so..... 1. will the current flow cause a problem with the carpet? (ex heat causing fire or burning of the carpet) 2. The nuts and bolts are all Stainless Steel, is that ok for this use? 3. Will these affect the ohm load that the amp sees? (imp rise?) Thank you in advance Sry if these are dumb ?'s, I used the search bar, but I didnt get much that really helped.

louder? ...................say whaaaaaaaaaaaaaaaaaaaaaaaaaaaat? Cant wait for a new video

If your settings are correct, you shouldnt be able to blow the subs if your underpowering them

Ok, so new box specs, are 4.6 cubes @ 35 hertz MAX DEMENSIONS so no more cubes to gain anywhere, will the .2 cubes per woofer really matter, cuz he doesnt want to spend 700 bucks on 2 12s that can take 1k daily and be loud. Cant get DC because Slapuhho would slit his wrist because he wouldnt be the only one in champaign who had them. So two choices, a 15" Btl in too small of a box (which you guys have said is a bad thing, which it is) = 3.15 cubes OR 2 12" AQ HD's with 2.3 cubes PER woofer and tuned to 35 hertz. Seems like an easy decision to me.

On 2.5 k rms, I think is plenty enuogh for the two aq's, in 3.8 cubes, isnt the usual enclosure for a 12 about 1.5-2.5 cunes, I dont see a problem here? There the HD Series sub not the SD's

He wants more cone area, and I think those subs in about 1.75-2 cubes will slam.

Ok, so the height is good now, but with the bracing I still get 3.14 cubes (which he doesnt want) But for 2 12's I get 3.81 cubes w/ 16.5 inches of height with everything i need for a good box. He wants input on aq not weather or not the box will work.

I dont like there only being about 1/4"-1/2" between the circle and the top and bottem plate, I just dont see that as being too strong. Especially with 2k+ watts and a btl. And this wasnt even the box plan I had with 17", with 17" I came up with a little more than 3 cubes. And I'm pretty sure he doesnt want that.

Well for me its 17"-1.5" (Mdf Top and bottem plate)=15.5 Outer ring of sub = 15.625" And there wouldnt be that much space between the baffles and the top and bottem plate, like less than an inch on top and bottem of the sub, so i dont think it would be that strong?

As of right now I have a box with 3.8 cubes so 1.9 per woofer, @ 36 hz with roughly 13 square inches of port per cube. So lets get some input from SMD

Same kinda thing happened to me, something wasnt working right with my sub, i emailed scott and he called me like an hour later. He said he would take care of it, and he paid for shipping both ways, ($80 both ways) and sub came back in a timley (sp) fashion and worked perfect. Got my 1 12" Bl to hit 142.1 and growing. So to Fi Customer Service :give_rose:

Even with the big 3 all 1/0 wire and those batts he'll drop into the 12's? isnt that a bad thing? lol I dont even like dropping into the high 13's when I use my knob.

not in a car yet. so i dont know, if i knew what the voltage drop was then i wouldnt ask a ? like this here. indeed, but even with those two batts and only 2500 watts he will need a new alt? I am running 2k rms and my voltage doesnt drop below 14. stock alt. with yellow top up front and kinetik 1800 in back

So i told him what a guy said at the shop about him NEEDING a h/o alt. Heres the set up 1 fi btl 15" 1 saz 2k 1 hc 2400 1 optima yellow top STOCK ALT I think that he will be fine with that little battery bank, he trusts this forum so I told him I would post this up. Thanks Again I know a h/o alt cant hurt, but thats not the ? here, does he NEED a h/o alt in order to have this system. EDIT: Car is a 98 maxima thanks

4 15" Fully Loaded Btls in a wall 18 Cubes @ 30 hz 4 Rockford Fosgate 2500's 2 Rockford Fosgate T-1500-4 T3 Mids n Highs Some 8v preout Headunit 2 300 amp alts 4 Kinetik Hc 3800's Maybe all that will take away some of that 12" lift.

I wonder who installed all that to make car go boom? I love sitting in this car, too bad it doesnt meter all that well, because "techniaclly" im louder, but you feel his shit. Even though im used to 150's now that I lost my 150 db virginity so I dont even hear it lol But for real his shit fucks his car up........... And thats how it is supposed to be P.S. Oren, dont expect too much from me, because you cant even give me the $$$ for paypal in order to order your shit. You fuggin failure

, yea mine is the loudest i've heard on music 142.1, but the loudest burp was with my friends 12 was a 144.1 with some american bass shit

bumpity bump bump read post 20 Thanks

Great Video I dont know the last time I watched a youtube video and learned something great stuff keep up the good work

bump, read above post aka post 20

You better have this fixed by the 30th , I need to hear this :hairtrick: :hairtrick:

So does that mean that every cut i make with my router it needs to be 1/2" less than the circle? because I cut my bl's hole @ 11.125" and it doesnt fit tight, I can move it around, not a lot, but enough. But on Fi's website it says 11.125 inside diameter.

what do you mean by this, the inside or the outside of the bit? I thought that the jasper jig took that into account and thats why you use a 1/4" bit. So if i set it at 11.125" aka 11 1/8" what size hole would i get?

You can always get some new springs. Thats a relative cheap route

I am looking for kind of Rap/Techno or a Rap Techno mix. Maybe not exactly techno but electronic sounds or something of that nature for example this song http://www.rapbasement.com/audio/tf-mafia-...afia-muzik.html need some help finding some of these songs