Sir-Lancelot

Please send price for: 2 each 7.5k 2 each 9k Only looking to buy a pair, but want to see both please. 29501 Email Lance James [email protected]

Didn't Maxxsonics sue Zenon for ripping off their board designs some years ago?

Yes Sir. I will shoot you an email in a few. Hopefully yours is up and running too. Thanks Troy, I appreciate that.

Sure you can. PM me your addy and it's your's when I take it out.

Plexi painted black with stinger volt meter. On top of that in red is the XS VCM. Im'a rework this soon and place both behind some plexi with 5% window tint on the back side.

Thanks Buddy! On the alts, you would have to ask Troy. Good guy with good products. If you havent seen his build, you should. Anyone who would spend weeks and weeks polishing fuse blocks by hand would put out a good product. LOL [email protected] Tell him Lance sent you. Thanks Bro. LOL. Thanks, but that song is embedded. I will take one of the mids for ya tho. The B&C are really nice and get damn loud too. I am sure with gas prices, you can find one pretty easily now. lol 12 mpg is killing me, and if gas does go to $6/gal you are going to see my moped build on here next.

thanks! Should be better when I add the other two alts, and install a head unit that don't cut off at 28 of 30.

Little video a buddy put together for me.

Thank you Sir. 4 - 18's

Took a few vids, got a few more that need uploading. Check em out and lemme know what you think about these new SQ Moofers from SSA!

crank on your torsion bars a little bit or add ford/similar keys to lift up the front. Shouldnt be too hard to get little lift.

Just put a 2" spacer on top of the coil. Easy! I run 3" on mine, but if you go that tall you will have to relocate the panhard bar. 2" coil spacer

your pissing in the wind if you don't know where your truck peaks. Build a sealed box and play some tones.

Why do all posts like this turn into the same folks pimping their shit? Bunch of Vultures if you ask me.

If your going to clay, polish, and wax..........why not dish soap?

Neither of those are going to get loud, but should have nice bottom end.

Thanks but thoes are just a hair out of my price range when buying 16 of them Unless you are just going for the look, you really dont need 16 mids. I have one 10" mid in my front door and one 8" mid in my rear door and they keep up plenty with over 150db. Always best to have one source, IMO. Now if it's just for the look of a shit load of drivers in your door, well.........never mind. lol

Look at mids from B&C or 18sound and match with a HLCD horn. Win.

SOLD !

Thanks man.

BUMP for some badass Subs.

Good stuff Buddy!

18" SSA Xcons D1 1. Product: 2 ea - 18" SSA Xcons, 2 are already sold. 2. Specs: * 3"” wide, 4 layer, Aluminum coils * Push terminals * Pulp Fiber Cone * 5 progressive spiders * Custom FEA optimized motor * Aluminum Shorting Ring * 3" Anodized alum. former * Triple Sandwiched Leads * Hand crafted in USA * 1750 rms Specifications: 18" SSA XCON D1 Re 3.7 Fs 27.6 Qms 6.44 Qes .48 Qts .45 Mms 321 Vas 213 Sd 1210 Bl 20.72 SPL 91.5 Xmax 31mm 3. Description/Condition: Used - Excellent condition! I take VERY good care of my stuff. 8/10 since they are used. 4. Price: : $280.00 each plus shipping. I can get a really good rate via Fed X and will work with the buyer on this. 5. Pictures :

I always did like these, maybe better than the 350. Nice ride man.

The bats have nothing to do with it, check you wiring and settings.