Jump to content

thorshammer

Members
 View Profile  See their activity

  • Posts

    2317

  • Joined

  • Last visited

 Content Type 

Everything posted by thorshammer

  1. thorshammer
    Total sir
  2. thorshammer
  3. thorshammer
    Cut port length 2 inches and found 141.3 @ 44hz consistent. Not bad for less than 400 watts!
  4. thorshammer
    Hell Yeah! It's gonna be a great time and a fun show! Did some testing with a Lanzar Opti 1800 @ 4ohm Box forward firing pushed up against the trunk lid 140.0 43hz Pushed box forward and did a partial seal around it 141.1 43 hz Gonna push it back and do a partial seal before I get crazy with the port length.
  5. thorshammer
    It's alll back in and wired to a Lanzar Opti 1800. LOL Kinda wiggles but still loud.
  6. thorshammer
    For mids and highs I got Phoenix Gold Xenon 6.5's up front and Polk momo 6x9's (with a pg crossover) in the rear powered by a PG Xenon 200.4. They do farely well with about 175-200 clean watts per corner. They stink after a bit but with 2krms or so no stinky. I do turn it down when that happpens unless I'm being vindictive. Once I get it back together I'll do a rock vid for ya.
  7. thorshammer
    Sounds like its toast!
  8. thorshammer
    Big port does change tuning and make it harder to tune low. That AQ has 8 extra stiff spiders in it. That's why it didnt move. 2krms http://www.dcsoundlab.com/specs.html When I'm done you'll see 4-6krms well below tuning.
  9. thorshammer
    Tacoma theres no real secrets to what I do. I've been testing on this car for over 3yrs to find what works. The hardest part for me is trying something new. LOL Iwent back to this box for the 3x DBDrag on Sept 20th to try and recapture some of the success I had with it. I really want to try a center firing port but was to chicken to do it this round. Definately over the winter will try it.
  10. thorshammer
    The only number that I'm after! 150+bassracing:)
  11. thorshammer
    This is a revisit box. LOL It consistanstly hit 150-150.3 43hz and 148.6-.8 bassracing lil jon push that Interior chamber is less than 2.5cu. Port is 10 x 13.5. I know its not pretty but fawk I only got 3 days to completely rebuild and test for port length.
  12. thorshammer
    What he said^^
  13. thorshammer
    Ya know I want a pr.! 10's of course!!!!
  14. thorshammer
    Dangit I didnt get my invite! WTF!! LOL Nice vidz Rusty! Now get that man some more power so those bad boys can get up and
  15. thorshammer
    With 4 spiders I noticed a diff about a week later. After that 5 showed promise and have since stepped up to 6 extra stiff to try and hold the sub in the gap while being punished by 14k)
  16. thorshammer
    Nice to see ya finally came over Jer!
  17. thorshammer
    x2 on home depot goop or shoe goop from walmart works!
  18. thorshammer
    First box no corners and every time i put one in I lost. Second box 1 in the port bend. Recones are here and will be done shortly. Round 3! Aint done yet!
  19. thorshammer
    I did it with the AQ's first so I def. say it counts And Red is my hero!
  20. thorshammer
    For some it's not all about being pretty. This set up gets rebuilt on a regular until I find the right combo and then It'll start to get prettier. Besides show me someone else that can pull a 151.5 @ 39hz with a pr. of 10's in a trunk As far as the duct tape. It helps hold surrounds,seal around boxes, and seal for testing. It will always be present. LOL The box on the bottom was the first I ever built and has been outside in the snow,rain etc...
  21. thorshammer
    So I pulled the sub and box out today and was quite surprized. The noise we hear in the vidz is the tinsel leads slamming against the cone. Sub is still 100% intact.
  22. thorshammer
    Very little soft part wieght compared to motor force coupled with the ability to not bottom out equals crazy excursion in BOTH Directions. On any other speaker you would have heard the former bottom out before the surround crinkles. Believe it or not the lvl 5 10 is extremely sensitive to music.
  23. thorshammer
    I see what ur saying but its nasty trying to work with 150+ pds on a baffle and hope ya don't break it. Plus nothing can get in the way of my surround. It likes to stretch out every now and again. LMAO!! Plus this way I can take out just one sub if it has issues. By all means buy a pr. and try it!
  24. thorshammer
    I would love to see ya do that with a sealed, resined, enclosure. How ya gonna pick up that beast? How ya gonna get aroung the port wall to do so?
  25. thorshammer
    It might just be me but i never have my subsonic freq on.. I'm also a psychopath that loves to beat up his subs until they cry mercy!
×
×
  • Create New...