Jump to content

MrSkippyJ

Members
  • Posts

    10293
  • Joined

  • Last visited

  • Days Won

    22

Everything posted by MrSkippyJ

  1. I think he meant a prefab box for 2 12s, hence the duel wording. Not a box made by Duel.
  2. That's only if you are using the chasis or frame for a ground. In theory, every wire should be as short as possible.
  3. Lets see, moved out when I was 19 (went to a local community college after H.S. for 2 years) then moved out to go to a regular university. Stayed there until I graduated (I was on the 8 year plan!) but I worked a full time job and paid my own way through school, and I was lazy. Lots of 1 class semesters for me, but I loved every minute of it. Met my wife in marching band (which I would not have done if I graduated on time), we dated for about 5 years, got married. I go home as often as I can to see my parents, I was not in any hurry to move out, but it sure was nice. There is something about a broken, old, ugly, dirty, messy, smelly, and funktified college apartment you share with your best friend and pay for on your own that is very special.
  4. Wow, this brings back some old memories!
  5. You can distort speakers with any amount of power. I'm going to guess he is trying to play them too loud on too little power.
  6. Aww, I was hoping for a fellow baritone! Sax was my main instrument but I would never march it, so I marched baritone.
  7. I am holding off telling him that because I hope that we are just reading it wrong. I REALLY hope we are reading it wrong.
  8. You want to put 2 speakers on the left channel (16ohm) and 2 speakers on the right channel (16ohm) and then connect the right channel to one voice coil of the 15" sub and the left channel to the other voice coil of the 15" sub?
  9. If you wanted to get really technical, batteries don't make power, they store (and release) it.
  10. Yes you are good. Just make sure the coils are in a series and the subs are in parallel. There are 2 speaker terminal connections on the amp for simplicity. Like I said before it makes NO difference how you decide to hook your subs up to your amp. It is like a buss bar (both +s are connected together and both -s are connected together) so leaving one unconnected makes no difference.
  11. Ignore that post, I thought it was a 2 channel amp. Read the next post I wrote.
  12. oh. I assumed the .2 meant 2 channel sorry. I makes no difference what speaker connections you use then. They are the same (well both + are the same and both - are the same). Wire your coils in a series and then hook each sub to one of the terminals (as if it were a 2 channel.)
  13. You don't want to bridge the amp with those speakers because the ohm load with either be too high (not getting enough power) or too low (damaging the amp). As far as damaging something, there is no different danger with that amp than any other amp that is bridgeable. Anything that can happen to that amp (or speakers) while bridged can happen to any other amp/speakers. Running the amp stereo has the same ohm problems as bridged, you are either underpowering your subs or overworking your amp. Run one sub or get a new amp.
  14. Bridge your amp but you want D1 or D4 ohm coils. Either that or get a mono block amp.
  15. I would say stick with stock until you can afford both speakers and amp. You don't want to buy speakers that work well with your factory HU just to have to buy speakers that work well with an amp later on. Either that or buy speakers you know will work well with an amp and use those from your factory HU.
  16. A good point but if he is running one amp for the front and rear speakers he will likely not be running active.
  17. I love Five Guys burgers...and fries...yum.
  18. Then Jack in the Box all the way. I have never been a fan of any of Hardees variations.
  19. Carls Jr is the same thing as Hardees right?
×
×
  • Create New...