Tebo

my level 4 has some damage on the foam =( i could just pick up another level 4 but i kind of want to try something. or i might stick with dc i dont know yet

ive never looked at them so im not sure if i could afford them. Ill go check em out now though for sure

i was going to great stuff the holes in hatch then deaden the inner skin then put 1/2in mdf over all of that. Probably black carpet on it.

im probably going to have to shoot low and do 3 cubes each. if i can tuning down to like 34 hz id be happy but this might be a stretch.

Alright guys im thinking about selling my level 4 15 and buy two audioque sd2.5 15s. I want to double check and see if i could fit a box that big. My max dimensions are 24 tall 21 deep and 37 wide. I was hoping to be able to do subs up port towards the hatch that will be deadened to no end.

im still new to amp rise i have one question. Does imp rise get greater with a higher starting impedance? i clamped my system a longgg time ago so i dont remember actual numbers but i started with 1 ohm and got rise to 3.something ohms. Or does it all have to do with the box?

i heard these once when robs alternator wasnt doing to well and they were still nuts!

look for something that will meet your exact needs or close to them, since your running 3 different speakers you will need a 3 way cross over, at 4000hz and up, 500hz and up, and finally 150 hz and up for your woofer.

ive got 2 dd 8s, 2 4 inch aeros 17 inches long box is right around 2.0 after displacements and im pushing it with an ap1500 no problems so far. My box could e a tad smaller. You will be happy with your 8s if you do a good install there is a decent shock factor mine slam pretty good

ive got the pioneer 4200 and i love it. When using a flash based ipod your fine but when i use my 160gb ipod classic there can be some lag between songs, but it isnt terrible.

leave my cowboys out of this yeah they've already been banned from the endzone no need to get em banned here too.; LOL great post. I never understood why people flip over a simple warning. Just roll with it

I just put some dd 1508s in my car today, they have less than 10 minutes of playing time on them. So far they are pretty sick, ive got them in a 2 cubic foot box after all displacements, for my port im using 2 4 inch aeros 17 inches long calculator says around 37hz and im very happy with them

Ive got another update for you guys, ive been getting alot of work done on this build im really happy with it so far. I got the first coat of primer on last night and layed down another coat of primer after work today, im going to throw down one more layer of primer very soon and once that dries my first coat of color is going down. I picked a color from beher called dark granite. Should go well with my car. Also i got tracking number on both my orders, should have the port tomorrow and the subs thursday which works out perfectly! Uploaded with ImageShack.us By unfairtebo at 2010-11-30 Here is my soundstream bx-10 bass enhancer, i made a little mount for it 3/4inch mdf and a small round over from my new router, first official project with a router and it seems pretty easy to use. Bass enhancer works well By unfairtebo at 2010-11-30

no matter how i mix it bondo never seems to dry fast enough for me LOL. I need to learn some patients. anyways here are some pictures of the work i got done yesterday, i started some bondo work and caulked up my seems just for safe measure. Today i finshed my initial bondo work and with in the next hour or less i will start sanding. Then possibly a little more bondo. By unfairtebo at 2010-11-29 By unfairtebo at 2010-11-29

Yeah thor is the man! I did some more work on the box today, i got the last hole for the 2nd aero cut, you guys probably wont see pics of my aero holes because they are shitty as all hell. I caulked up the inside of box and mixed a small batch of bondo and got some of the screw holes covered up. I should be mixing a bigger batch later to finish off my bondo work. Probably going to sand the bondo down tomorrow after work and tuesday its going to get a couple coats of primer. Wednesday or thursday i should my ports and hopefully subs! pics up later

If i had the money totally, but the amp upgrade is going to be a little ways down the road i have to get my snow treads mounted and get a front end alignment

I have a beast of one for you the amp upgrade is a bit down the road, i have to have my snow treads mounted and get a front end alignment. Then its christmas time so limited cash for audio

alright ive got another update, i made some cuts on the box today, i got the sub holes cut and cut one of the openings for one of the aero ports. I am going to cut the other tomorrow. I would have done it tonight but i broke my blade and didnt really feel like changing it lol. Heres a pic i took with my phone Uploaded with ImageShack.us

mini update, i got my ports ordered up then realized with the size of my box i cant do subs back port back like i want to so looks like its going to be subs up port back should be okay right?

it works well, its not the best amp obviously but it does very well for what i paid for it. I think i am going to upgrade to maybe a DD amp or a fosgate

I had this post typed out once already and then fire fox crapped out on me and crashed so here it goes again. Here is the car as it sits, here you can see my false floor which is bolt to the factory floor hinges so i can still get to my spare tire. My 4 channel is mounted there for the time being but will be moved up to the back of the back seat. By unfairtebo at 2010-11-26 Lets cut some wood! i made all of my cuts a straight edge and circular saw and i am over all happy with my cuts, there was one cut which i was pissed about but nothing some bondo cant fix. By unfairtebo at 2010-11-26 I got all of my cuts done and ready to assemble. By unfairtebo at 2010-11-26 Here is the box as it sits in the car, its not in its exact place because the 4 channel is still mounted there By unfairtebo at 2010-11-26 The box is 2.49 cubic feet before sub and port displacement, after sub displacement it comes out to be 2.39 i havent figured out my aero port lengths yet which i will need help with but i will be using 2 4inch aeros. Well thats all i got tonight, tomorrow after work i plan on measuring out all of my holes to cut and sand the box down, depending on how much work i get down sunday i will either fiber glass resin the inside of the box or bondo the screw holes and small eff ups we shall see.

Here is what i am rebuilding from its a dc level 4 15 tuned to 30hz wired to 1 ohm running off an ap1500 Uploaded with ImageShack.us It did a 144.1 with the meter on the windshield sealed up at 47hz thanks to thor for teaching me how to test test and test

Alright guys my level 4 15 is ripping my car apart mainly my windshield. The windshield was damaged by the sub originally the glass cracked right around the where the mirror mounts so i think the flexing made the mirror pop off the second time this time taking a massive chunk of glass with it. SO here is my rebuild im using 2 digital designs 1508's which i ordered today and am hoping to have in my car playing by thursday or friday of next week =) Here is my car:

ive seen a pretty nasty enclosure similar to that but it was fiber glass and 2 12s, cant remember where

ive seen a pretty nast enclosure similar to that but it was fiber glass and 2 12s, cant remember where