Jump to content

Marlo Stanfield

Members
  • Posts

    2076
  • Joined

  • Last visited

Everything posted by Marlo Stanfield

  1. I really don't understand how you'd smell an electrical type burning + smoke and not think to turn it down Please keep us updated on what you're gonna be doing in the future.
  2. You will have more than enough room... But depending on what you're planning to spend I'd run 2 15s below the window line. Also like mentioned by the above poster, you always could just go all out and wall it off with a couple 18s or 15s. It is all very dependent on your budget, willingness to tear sum thing apart, and ability level to do a build of whatever nature ur planning on.
  3. Please don't comment on subs real world power handling capabilities if u don't know them and are just going by the ratings on the website. To the OP - That is a very nice setup you have listed but I can almost guarantee you that it will go over $5k, so I'd plan on it doing so. You also forgot to factor in the cost of building materials for the enclosure(wood, screws/nails, glue, sealant, resin, etc). Also the HDC3s will be completely fine with around 1700w per woofer daily, even though after box rise they'll be seeing less than that. Have you ever built a setup like this nature before or is this a first for you?? 4 HDC310s, 2 3500Ds, 2 4X90s, 2 AQG6.5s = $2,750 shipped, I was bored so i added it up for ya. 2 260a alts(idk pricing for DC, this is approx.) = $700-900 shipped 5 XS 3100s(approx pricing) = $1500-1800 shipped Crossover, wiring, wiring accessories(approx.) = $400-700 shipped Box building materials = $100-200 Etc = $50-100 Total = $5500 - $6450... This isn't an exact number, but just thought I'd give u a very rough estimate.
  4. :01nocomment8so:
  5. For W3s I'd tune around 32-35hz range if u can fit the port length(once u show the sketches, I'll see if i can figure it all out for ya).
  6. Yea if it's just gonna be folded down anyways, then just remove it and not have to worry about space restrictions.
  7. I hope u have at least like 8ft3 gross to begin with or I'd just run a 15... How much power u planning on running??
  8. As long as the vibration is kept to a very minimum then it's a great amp. Also it will run at .5ohm all day long.
  9. If you're planning on running it for daily purposes I'd look for different amps to make that amount of power. They aren't the best daily amps, especially the 14k2d. If you don't know what you're doing(sometimes even if u do lol) then you will only have major issues in the long run. To the OP - Do u have any sort of idea what kind of amperage this amp pulls @ 1ohm?? Do u understand what sort of electrical it takes to run that amount of amperage daily and how much it costs?? Are u truly expecting a pair of HDC3s to be ok with that sort of power?? Do u really think that amp will make exactly 16,800 watts @ 1ohm?? Have u ever run anywhere near this amount of power in the past?? Have you ever build a wall before?? Honestly this is one of those things that is "if u gotta ask these questions, are u truly capable to do a build of this nature"
  10. For $300 that's not bad at all... Any vids of it playing??
  11. Are u really using a staple gun to keep the carpeting in place?? I'm still confused why u kept 5 instead of say 4 or 6. It just makes thing a bigger pain in the ass wiring wise and it just looks odd to me with 5.
  12. That is a totally different amp, idk why u even mentioned that. I've run tons of amps @ .5ohm or lower before but it's irrelevant if it's not the same one he had. If he is talking about the Audiopipe 3000D then I have 100% confidence that it will be blown in a very short period of time. Doesn't seem like the OP understands that the 3000D is a 2 channel amp, that has 2 1500D boards each one wired to 1ohm and bridged to a final 2ohm load to reach its highest power output(this is what AP rates it at). It's a serious risk to even run that amp at 1ohm bridged because the 2 internal boards aren't happy each seeing .5ohm at all. They will get very hot very quickly and will be pulling a ton more amperage than @ 2ohms without seeing a big power gain.
  13. Nice addition Rusty.. I have no doubt that this list will be growing exponentially over the next couple seasons. You guys had a great season for a "new" company and things are just going up from here hopefully.
  14. Good luck getting exactly that much amount of power out of that amp. I'm sure your voltage, impedance after box rise, etc will be exactly what you need to get that precise amount. For sum odd reason I see this as not happening what so ever lol. If you don't understand that u won't be seeing that exact power rating, then this might be a little out of your league. Don't know the OP but just judging from his posts, I doubt he can handle building a wall w/ 4 18s and 15k+.
  15. They are great woofers(Sundown Nightshades) but if you're planning on buying one right now you're gonna have to wait until they release the new v2 model.
  16. Stop being a pussy and just drink beer. I'd make fun of you too if u were putting smirnoff/mike's hard in the cups instead of beer. Plus those cups will get gross as hell if the next person who was on the table is drinking beer and not your wine coolers. Old colt 45 isn't really the ideal beer(if that story is true) to see if u like it or not. Try out the normal female beers(lite beer) and you'll prolli like it more. Beer is an acquired taste and the more u drink of it the better it will taste over time.
  17. You're wiring that amp to .8ohms?? If so u might as well just light it on fire ahead of time, since each board will be seeing .4ohms each and bridged to .8ohm total.
  18. You must have cracked a serious smile when u first saw that shit.. Something like that requires you to kick back, crack open a brew and have a smirk on your face for awhile.
  19. Very nice... I'm guessing you'll be running it at 1ohm?? If so I'd be careful with the gains/volume knob and keep an eye on the woofer.
  20. For a 60lb woofer and 2kw I'd suggest a double baffle plus sum bracing. I've done flush mounts in the past also and it is somewhat difficult to get a heavy sub out(when its subs are facing upwards).
  21. Not true at all btw. A high 140 @ a low hz will do a pretty badass hairtrick. I'm also very confused as to what the OP is trying to say/ask here.
  22. Decent numbers at best hahaha... This thing is just nuts man, congrats on all your successes with it.
  23. Showed this to a female "friend" of mine and she's been looking for something to rock when she comes to shows with me. Also put me in for a hoodie when u get sum under way.
  24. I have to agree 100% on this statement.
×
×
  • Create New...