sub2weeker

You should bump those 1500s up to 3000s and you might break a 160.

i had some dude not want to be a ADMIN because i like to say FUCK THAT. he wants to be freinds with EVERYONE... MAAAN...... FUUUUUUUCK THAT!

im lookin at $100 to 150 or so for first place..it also depends on the # of entry's

So this will be the 1st annual October Cash Smash, a 4 week event, the next 4 weeks we will be having 4 seperate shows at the Ultimate Electronics on 84th ave and i25. BASS CONTROLwill be 29.9 class and 39.9 class only. and 1st place takes home $$$$$$$Cash$$$$$$$ there will also be POWER verses POWER SPL. a 2x point event this will be WALL, NO wall and Trunk combined. This will be metered in all three Locations to determine your True "legal" SPL score. unless ---A.) 0 - 2500 (2 batt limit) or within 220ah. etc... ----B.) 2501 - 5000 (4 batt limit) -----C.) 5001- 10000 (8 batt limit) ------D.) 10001-16000 (12 batt limit) -------E.) 16000 + (unlimited batt limit) so here are the dates October 10th October 17th October 24TH October 30th will be a BASSCONTROL AND LOW END MONSTER EVENT. we will have a best holloween costume award, the woofer toss, and SUB bowling. Entry Fee will be $30 for the first event, and $40 for SPL and BASSCONTROL For Each additional event, the entry fee is $10.00 For those Competitors wanting to enter other events for Points, such as (TSPL) (PSPL) Low end monster or DTP. points will be carried over to next year. although no awards will be given for events not on this venue, ONLY POINTS.

laroux going in for the kill (decaf version)

yep i deal with the guy on a weekly basis. Dude is busy but allways comes through.

so which one is easiest to maneuver in? and that actually works and inst a bunch of BS?

just expect the bolts to be broken when your done. they make an impact Screwdriver, handheld, and the heads will break right off.. so be prepared because you will be drilling those bitches out. or you could use acetone and let it soak and break the superglue holding the screws in. lol..

nice numbers.. whats in there

with all due respect Steve doesnt this guy asking questions about Sound deadner deserve to know about whats on the market? i just happened to make a pretty bad ass video and a demonstration to see what the product is all about... and i no longer see it posted here

you know i oiled all the pully bearings and the airconditioner. but it only happens when i get heavy on the stereo and that alternator kicks it

Ok.... so here is the problem, My alternator is a 240 H/O. it charges my battery bank of 10 batts in back. it used to be just fine. but my brother over filled my power steering fluid and at a show i was giving the vehicle gas to keep the rpm up and it overflowed due to the hydroboost. And my alternator just went into perminant squak mode. so here is a list of things i have done: 1.) Sprayed all the pullies with brake cleaner 2.) Put on a new Belt 1/2in shorter 3.) Put on a new Tensioner Pully assembly 4.) used Belt dressing 5.) had my alternator guy put a new front bearing in it and still when i start it up i get a little squack but it goes away until i turn up the stereo and demand power out of it. And i have 2 runs of 4/0, not 4 guage, 4/0 directly off the alternator to the back. SO WTF????? i cant figure it out.

Sat SEPT 18th, ColoSprings Cartoys, on north Acadamy road One block past Briargate. 7555 North Academy Boulevard, Colorado Springs - (719) 592-0628 I will be holding a BASSCONTOL and SPL event entry fee will be $30 Basscontrol classes (first place trophy only) 129.9 139.9 149.9 SPL classes (first place trophy) (2nd place 12.6sqft Audiowrap) single sub - 1 15 and 2 8s or 2 10s 1 18 to 2 12s 2 15s - 2 18s 3 subs + This will be a Double point event for the BASSCONTROL