jeyrapboy

LOL

Well in meades video his stereo clipped just short of being turned all the way up. My buddys can be turned all the way up without sending a clipped single.

Hook up your oscope to the RCAs running to your amp and play the test tone till your single clips, slowly increasing the volume, if it dont clip and you have it cranked all the way up then you HU wont be sending a clipped single. If it does start to clip, note what volume it starts to clip at and make a mental note not to turn it up past that. Then set you amp gains accordingly

No because you could send a clipped single from you HU to your amp.

Still pretty fuckin sick.

It might be a lot of work, but when its all said and done i will have something to be proud of. Everyone is telling me to glass the breaks and then just cover it with a cool looking fabric.

I also have AT LEAST 2 weeks before this will be happening. So i have lots of time to plan.

I have already thought about the tweets, also i have decided to fiberglass that whole thing and paint it. Have not seen something like that around here. I just have to figure out how to remove the seat belts.

I have to! Thats the only way to go.

Well and new headliner board at the is going to run $250, the local junkyard have tons of jeeps but none that have a DECENT headliner. Also my buddy has 1 gallon of resin to give me, so that covered just got to get the fiberglass mat.

Bump

Damn man that box is lookin good. I still need to build me a amp rack of some sorts

Still lookin good man. I wish i could get some shit to do work.

Also if you know where to get fiberglass cheap let me know. I can get 8sq ft or 96x96 for 5.99 at my local auto shop and resin i got covered.

Okay my headliner broke and i am going to fiberglass the breaks so i wont be out a lot of money. Then i had the idea to go ahead and fiberglass THE WHOLE headliner board, sand, paint, and make it one of a kind. My buddy said that i only have to fiberglass the breaks, i can just resin the rest. SO my question should i fiberglass everything, or do i just put on some resin? I think fiberglassing the whole thing will look better Thoughts?!

Well guys after looking the headliner board i discovered that on both sides there is a 6 inch break so its close to braking in half. I have decided to go the FIBERGLASS route. I am going to fix the break with fiberglass and resin. Then turn around and fiberglass the whole under side. Prolly paint it to match the paint outside or to match the interior idk yet. So if you know where to get some fiberglass mat cheap let me know. AUTOZONE has 8sq ft for 5.99 anything cheaper even online let me know THANKS!

I got some headliner glue. Thanks for the advice. I think i am going to go ahead and try to salvage it today. Ill post pics when i am done.

Well the board is not THAT bad and the cloth is ok. I figured i would go ahead and see if i could salvage it.

Okay my headline was falling down, so i went and picked up some glue so i could take out my headliner and re-glue it, well when i took out the headliner it literally crumbled and i have no idea what to do. There is more but i didnt feel like taking more pics. So i already know i am leaving it out, but any ideas on what i should put in it place. Serious ideas only. Something that not going to cost a shit ton.

What kind of vehicle. You should have enough room with some planning.

H/O alt Big 3 I think a 120 amp fuse is what you will need (dont quote me) Extra batt That should help out a lot!

That one sweet ride!

i use a 3.5 to 3.5 for mine and have no problems.

It need to be cleaned cuz after it dried dust was flying and i didnt wipe it down before i put it on. Also this thursday i am supposed to be getting some paint so i might pick up some plastic paint cuz IDK if the $1 shit from walmart will do it up right.