Well for me, its more of a budget problem to get the 1200.1 rather than the 2200.1, but as you said, later down the road, i could always upgrade the amp.
Right now, im looking at shuriken batterys on ebay. If I went with one of those, and ran 4 gauge from the stock battery to the shuriken battery in the trunk, then from the shuriken battery positive terminal to my 2 amps (RF 400.4 for highs, AQ 1200.1 for lows) and grounded those amps to the negative post on the shuriken battery. Would that be a good setup, with out too much power loss? Keep in mind i will most likely do a big 3 upgrade on top of this.
I know better than to blast it for an hour straight (if that's what full tilt means), but for a few min blasting a few min at %75 power, would this setup be good? And of course, turn off all amps 15 min. before parking the car to charge up the battery's.
EDIT: i've figured out my enclosure cubic feet is 2.5 cubic feet (i took off .5 off each dimension for wood size already)
my port is estimated 28" long(didnt take out sub to measure slot), 9" deep (10 if u include the slot) and 1" wide at port.