C.Sanchez.A

Yeah I wasn't really going for true dual, just the look.

LEDs for what? The doors? Dome? Plate? Box? Haha Sorry I should have asked, what LEDs did you use where? I check out the site and I'm bot sure what the LEDs do what.

Actually the height is 19", 19-15 = 4-0.75 = 3.25. Well at least I have enough port this time. I will make the adjustments with the ports and then I should be good to build!

Do you have all the screws in place? I know it may sound like a stupid question but it's better to cover all the basses.

Nice! what LEDs did you use? I'm planning on doing something similar with my sub box.

Ok here is a revised version of the design. In the sketches I left out the bracing, but there will be 45s in the corners and a rode between the subs connecting the baffle to the back of the box. Hopefully this one will be okay. I am hoping to start building the box this upcoming weekend. The black circles in the box represent the magnet, to see if there was clearance for the ports. I wasn't sure of the magnet size so I guessed 8" diameter.

I need to change the exhaust on my truck and figured this would be the best time to upgrade. The truck is a 1994 Mazda B3000 3L V6 (1994 3L V6 Ranger). I would like two exhausts out the back. Any suggestions or places to look? I would be getting a shop to install it, unless it is bolt on. I would how ever like it to be one piece (welded and not bolted together). Thanks

What vehicle is it?

Thank you! I was giving my self some slack.

Because the braces will take up about 1 cu. ft. of displacement.

I know. I just didn't want to jix it. but I'm building the box for two Skar VVX-15s. Not sure on the amp yet.

How much would you recommend then?

I figured I would need more port. As for Vb, I'm guessing you meant Bv (box volume). The box volume is to the manufactures specification. They recommend 2.5 - 3 cu.ft. per driver. When you increase port, Vb (yes it's Vb) decreases.. I'm still new at this. But I know what you mean. Does the new calculations look better?

Better?

I figured I would need more port. As for Vb, I'm guessing you meant Bv (box volume). The box volume is to the manufactures specification. They recommend 2.5 - 3 cu.ft. per driver.

Every thing is starting to go good for me, so I'm going a to start my official build. I was looking at getting either two 12s or two 15s. After messing with Torre's Box Calculator I decided to go with the 15s. So here is what I cam up with... Let me know what you think.

Unfortunatly I am on my phone and can't view the web site. What are the box specs for the 12s and 15s? I'm in the market for new subs, I thinking of going with two 12s or one 15. What would shipping be with out the custom box? Edite: Shipping would be to Ontario, Canada (P1B1J6 to be more specific).

I must say, the yellow calipers look damn sexy!

I think i will go with black. I'm also thinking of colour matching the dash to the exterior paint and painting the accent pieces black.

Buying a new vehicle.

Rockford Fosgate p212s4, iirc. It's a sing 4ohm voice coil rated for 300wrms.

Not true. I could always run the speakers off the head unite. I'm just trying to get something quick, because the amp I am using now for my sub is a broken 4 channel, that does only 150wrms bridged.

Morning Bump.