sundownz

It's loud

Yep, all 100.2s are old style casing. They won't have the new case until the 125.2 version comes in.

It is a blank Nightshade dust cap

Still have plenty to go around. These were $240 drivers when they were current models being sold by SI

Two more days on the intro sale at dealers

http://www.soundsolutionsaudio.com/forum/i...showtopic=10634 Added some items over at *** today. Four 1500Ds and Two 100.2s available.

Cool

Cost is not quite nailed down 100% just yet.

Indeed! We'll start with a limited run of 15s in 4 months or so... then once we get full production geared up we will have 12s and 15s available.

150.3 seems to be it It didn't damage the sub going up higher on the HU but it starting having erratic motion (jumping the magnetic gap) so I called it a day! So it does let you know to back off before anything bad happens.

* Less wires now with just two amps * SAE-75.4 prototype along with 2x SAZ-3000Ds * First burp - Volume 20 on HU * Second burp - Volume 21 on HU * Third burp - Volume 22 on HU * Fourth burp - Volume 25 on HU Sub is a bit warm so I'm letting it cool down before continuing... HU goes to 35 and I was burping it there with the Monster sub on the four 1500s. Conclusion so far... the Z15 is awesome and the Monster really needed more power I am only doing 3 second burps... where I would let the monster run 8 seconds at a time. Have to be a bit more careful as this is only a "1000-watt" driver

Wow... Z15 for the win. Not quite done testing but I am letting it cool down before continuing. Pics coming in a minute. We re-did the amps with 2x 3000Ds as its a D4 sub... so we could get 1 ohm per amp. I also have a 225-amp alternator now.

*laughs* It is staying in the Jeep for a while I may compete with it this weekend.

True story... poor Anvil.

Bronco + Derrick's 18s =

*laughs* He has been eye-balling your subs I won't let him install them

Where can I find the information on his results ?

Indeed - looking for more good pics of Mike's Eclipse for the site. We have quite a few from Jake.

I believe they are exactly the same length... I'll double check for you today

ETA is also the 21st of next month like the 50.4 and 100.4

Pre-Order Posted!

$210 shipped in the continental USA on pre-order! Payment via Paypal to [email protected] Updates compared to SAX-100.2: 1) Upgraded from 50-amp to 70-amp power supply FETs 2) Revised crossovers with band-pass capability 3) New heat-sink style

Mounting depth.