Jump to content

sundownz

SMD PARTNER
 View Profile  See their activity

  • Posts

    6002

  • Joined

  • Last visited

  • Days Won

    3

 Content Type 

Everything posted by sundownz

  1. sundownz
    Lots of re-cones and built subs in the works.
  2. sundownz
    You will be able to get an idea on an ETA once we have an ETA on the new 12" basket tooling... until then there is no ETA. I do not expect MAP price to be under $500 -- as the NS v.2 was $525 MAP
  3. sundownz
    http://www.stevemeadedesigns.com/board/topic/130218-nightshade-v3-15-free-air-test-formerly-monster-v2-prototype/page__view__findpost__p__1837393
  4. sundownz
    Not immediately outside of perhaps a few special order for SPL use. Neither the 12-spoke or 4-spoke frame allows proper clearance and spider size to take advantage of this motor for daily musical applications... working on a solution to the basket issue, though will there be any new versions of the nightshade 12 this year? If we wrap up our basket tool there will be.
  5. sundownz
    Still small -- 0.6 cubes or so.
  6. sundownz
  7. sundownz
    We had guts in a few of the early intro threads -- but they are here : NS-1 on top and 4500D on bottom. The results Greg and his guys has shown speak for themselves I think
  8. sundownz
    Good stuff !
  9. sundownz
    Just finished unloading... will ship pre-orders next week as they all must be tested. I am very happy so far with how they turned out -- hope that customers enjoy them as much as I think they will ! If I ever get time I may drop one of these in my Jeep and see if I can still do a 150 with one of these 15s *laughs* Would be fun to try at least.
  10. sundownz
    We do not suggest sealed for these. The PR box was an 11" cube internally -- about the same size as a ported box.
  11. sundownz
    Right -- the magnet can be as close to the box wall as you want now. I also didn't have enough room in the back plate to drill through and not hit the shorting ring -- the v.1 didn't have a shorting ring.
  12. sundownz
    Don't miss your chance to pre-order these!
  13. sundownz
    These are due on Friday -- preorder is over.
  14. sundownz
    I made it back! Now to get caught up.
  15. sundownz
    Yes they will have the logo. Many of our prototypes do not have logos as printing needs to be done at higher production quantities.
  16. sundownz
    High frequency SPL is not the specialty of this woofer -- the inherently high inductance of the coil is not beneficial for these applications (we are using a huge internal shorting ring to get it as low as we can, of course). I will work on a few other coil variations that will do better at 50+ Hz than the standard 12-layer once these are in production.
  17. sundownz
    Thanks :drink40:
  18. sundownz
    Not immediately outside of perhaps a few special order for SPL use. Neither the 12-spoke or 4-spoke frame allows proper clearance and spider size to take advantage of this motor for daily musical applications... working on a solution to the basket issue, though
  19. sundownz
    More bottom end at 30 Hz and below, lower distortion in every major category (BL, CMS, Le), greatly reduced mechanical noise, higher long-term and burst power handling, and enhanced ruggedness (double leads, bigger spider, etc).
  20. sundownz
    If you have Paypal you can order that way -- for any further questions please e-mail [email protected] Your amp is a 2 ohm stable unit so you need two D2 coil subs.
  21. sundownz
    Do you mean on the gasket ? If so then I would suggest a weather stripping around the hole and/or reversing the gasket. I suppose that is what I mean. Sorry for being such a I didn't know you could reverse it, is it pretty easy to do or will I have to take it apart and glue it together and probably make a big mess of things? The gasket just slips on -- no glue.
  22. sundownz
    On my plan from Vegas to Minneapolis right now on some in-flight internet... as long as we don't miss our connection in MN I'll be at work tomorrow.
  23. sundownz
    Looks good - glad you like them!
  24. sundownz
    Do you mean on the gasket ? If so then I would suggest a weather stripping around the hole and/or reversing the gasket.
  25. sundownz
    It's all for sale It's some used over-stock stuff I got from JD.
×
×
  • Create New...