sundownz

It is legit -- several people have done similar scores now

X-12 will be about $90 more.

Yes they are -- see this SA-12 QC test video as well : We are hitting it with as much as ~1000 watts in free air dropping down pretty low in frequency.

We did our thermal cycle test on the X-12 with CCAW coil (final will have copper which we will also test) -- 1000 watts starting power for 5 minutes dropped to 900 across the duration so 10% compression... cranked up to ~1200-1250 and played for another 90 seconds before thermal failure. Again, our 60 Hz thermal test is brutal and we have fried MANY other drivers in ~2 minutes at their rated power levels. It's a very difficult test. All of our subs must pass for at LEAST 5 minutes to get their rating and we usually crank them up past rated after the 5 minute cycle as well. It's a long boring video and not quite a production model so I won't upload it -- when we do the copper production unit I will.

Looks nice !!

What error did you get ? Which program ?

Still working hard... truckload of amps due Thursday to Friday -- still working on large orders for several customers and dealers which include SA series AND amps. Going to be busy to capacity until Christmas !

Pre-Ordering is OVER -- amps due Thursday to Friday as long as the truck isn't delayed for any weird reasons.

Hey guys, Almost all of them shipped as of today -- just letting you all know !

Good news and bad news... about 80% of the 12s and 15s are now sold. Hate to see them go so fast but for the end consumers they will be available @ WoofersEtc.com as many of them are headed that way. For dealers -- I am working as hard as I can to increase production for you guys. They should be in full stock again beginning of February. As of this moment I do have some 12s both ways and 15s in D2 still available -- if you want some please email or call me right away !

LoL... they did order ALOT of SA woofers... they'll have 15s in stock after we are sold out at the warehouse.

Still waiting on the motor quote... super slow for some reason. Once I get that I'll have a rough cost estimate. Then I can start samples and testing when they are done.

E-Mail me and I will call for a quote as soon as I get a chance -- typically FedEx gives me a good deal international if I call.

Yes, we can -- I am working on getting a distributor there but until then you can order from us or a dealer.

For SA woofers ? Yah, it is the largest so far... next run coming in February is 25% over this one, next one that I'm planning for April will be another 25% over that one at least. Overall, including amps -- not even close to the largest dollar figure wise.

*laughs* We did get it done in 90 minutes.

Promised I would show some pictures... we got some of our SA shipment yesterday (8s, 10s, 12s, E8s) and it showed up in a nice container with no pallets. So we had alot of fun unloading * First thing we saw - exciting, right ? * Does it end ?! * My view from inside... I was in the container the whole time tossing boxes to the other guys * Expanding dramatically when it came out of the container *laughs* Had to stand back this far to get them all in the picture. We shipped all the E8 v.2 pre-orders today and SA-15 pre-orders will start going out on Monday. DO NOT e-mail me asking when your specific SA-15 order will go out -- the answer is as soon as we possibly can ship them for everyone. They will *roughly* be shipped in the order they are received but likely one coil configuration at a time as it's easier to pull them that way -- so later orders of, for example, D4s may get sent before earlier D2 orders. This method speeds up the overall process.

Are your LPF and subonic settings messed up ? We've seen this many times where most of the bass is getting canceled out by conflicting filters.

That is an SPL format -- so they count too.

The Team is for experienced SPL competitors -- who compete on a regular basis. People e-mail me to apply.

Don't do anything -- just don't run it with no load connected If your amp is not shutting off it's okay thermally.

I haven't lost any data... I am simply behind.

We are operating on an e-mail, phone, orders, and everything delay right now... currently installing new phone system, new computers, network devices, etc... so slowing down anything computer related. Also have several big shipments coming in starting today and for the next week... then pre-order shipping will commence. This will take up ALOT of time. So please be patient during this time as we will be *extremely* busy.

bobonit is correct -- anything else is a coincidence

If signal goes in the amp is still making voltage -- this can actually damage the output section as it can climb too high with no load.