OrzechNJ
-
Posts
7891 -
Joined
-
Last visited
-
Days Won
120
Content Type
Profiles
Forums
Events
Media Demo
Store
Collections
Videos
Everything posted by OrzechNJ
-
Sound Deadening help Please
OrzechNJ replied to viper1315's topic in Second Skin Sound Deadening and Automotive Insulation!
Im drivin 2000 accord 4 dr.. I was gonna start from the trunk .. cause it rattles a lot! I got only 20 sqft so I will put some on door if I have enough.. The roller was no problem cause there is all bunch of the at my company.. Was thinkin about heat-gun but not sure if its that much necessary .. thanks for the input guys !! I will put some pictures 2morrow ! -
Sound Deadening help Please
OrzechNJ replied to viper1315's topic in Second Skin Sound Deadening and Automotive Insulation!
Im gonna do my second skin 2morrow was gonna make a thread 2day but I see all i need is here.. i guess ? -
Just called, i have to send them the charger Thanks
-
yea but my battery is usually seatin on like 12.8 .. and it was fully charged after 10seconds .. ?!
-
I guess sth wrong with my battery than..
-
The orange led was on for couple sec
-
Hey i got my ex charger couple days ago and i plugged it in today and the red and green light turned on right away.. Im at my friends house and i dont have manual on me.. Is this ok or sth wrong with my battery? I got xs d3400
-
it depends if you have enough space between speaker and speaker cover
-
I just wanna make sure, before I start doin anythin.. It doesnt look so complicated .. (i think) and yea i know that the port has to have 4 1/8 everywhere ..
-
Front to Back = 16 5/8 x 14 1/2 Extension = 13 x 14 1/2 length of the port include the 45 corners ? or I need to add 3/4" for the 45? edit; 16 5/8 with the 45 or 16 5/8 + 3/4 = 17 3/8 ?
-
One mote question, whats the size of 45s?
-
big thanks to Joe X for the box design !!!!!
-
ok I will go for it .. thanks a lot for help !!! the only problem which I have is that I dont really have a good place to make all cuts etc so I will just go to home depot and they will cut it for me .. I might have some problems with cutting the port in the front pieces and the circles but I will go for it anyways ... any advises or anythin I should be careful about ?
-
the total net volume includes the 45 corners ?
-
torres says 5.86 - 2x 0.16disp so i got around 5.5cuft You are looking at the gross volume, look below to find the net volume, that is the one that specs the box it reads above 4 cubes but when you enter the driver displacement you will get about 4 cubes. oh yea.. I see now.. I will stick to this than ! and I still gotta think off how to cut all the stuff since torres doesnt include the port pieces with my port size..
-
I just checked and they recommend 2.5 cuft for single fi q 12.. so maybe I shouldnt go over 5?
-
torres says 5.86 - 2x 0.16disp so i got around 5.5cuft
-
i know it looks small but idk the other way ..
-
ok so heres the max dimensions that I can work with.. what u guys think ?
-
Im gonna measure the maximum dimensions today when i get back from work.. Thanks!
-
Ur dimensions are very similar to my current enclosure which i got with my p2s.. And im sure they will do much better in bigger enclosure cause they sound much lower with the trunk open..I was thinkin to make it at least 5cuft or more since they recommend 3.5 cuft for single fi q 12...
-
I dont remember exactly now but port tuned to 30hz with 5cuft gonna 4 inch wild and 10 inch long not sure
-
I was thinkin about aero ports to minimalize the "port sound" i might be wrong but thats what ive read before
-
http://www.stevemeadedesigns.com/board/topic/147975-pioneer-deh-80prs/page__pid__2111614__st__20#entry2111614
-
I just got mine yesterday, and the quality is real good. However they say that its pointless to get deh-80prs cause the 360.2 and .3 have whatever this HU has..