crunkjuice1

Jk'ing on car but thats what I feel mine is like compared to you guys cars lol, anyways from front to rear batteries only has one run for + and - do I need another run of each? About 400rms highs amp yes.

in this

I have 240 mechman alt big 3 in 1/0 pos and neg 1/0 from alt to a S3400 under hood pos and neg 1/0 runs to a D1200 in trunk 300amp fuse at front and rear of pos run on batteries. What else would I need? Another D1200 perhaps? (limited space in trunk but it is possible)

lol I say this to everyone all the damn time

You can just lower the adjustable voltage boost module down to 15v cold and once car warms up it will float around 14.4 to 14.8v. Thats on 12v batteries though and I'm sure the coming summer heat might lower it some more. You will have instructions that tell you how to set the potentiometer.

charge cap first but from what I remember on mine it loses juice quick until you wire it in. Pretty much get ring terminals and add them to the ground and power lines that go to amp and hook those to the cap then run new power and ground from cap to amp. I don't know if your cap has screws up on top or inputs for wire with hold down screws but if you have a distribution block for amps just run power line from cap to block as well as the rest of grounding. Be sure to charge it first it should have come with a little card like thing that has a light that dims as cap is filled.

zip 78228 thank you.

love taps, love taps, not full force kill blows, but yeah location IS sensitive so try to skip that part.

same as audio said but you can go cheaper. I went to lowes and bought a tiny drill bit and drilled a hole in middle of broken screw (use center punch first) then they also sell a reverse out drill bit the swirls on it are going the other way and you use drill in reverse. Actual name is kobalt #1 spiral screw extractor and a dewalt split point cobalt drill bit 3/32. Patience and a sharp center punch before you start to drill so bit doesn't walk is the main part once extractor catches it will clean threads on way out, good luck. http://www.lowes.com/pd_232606-1083-358241_0__?productId=1065081&Ntt=screw+extractor&pl=1&currentURL=%2Fpl__0__s%3FNtt%3Dscrew%2Bextractor http://www.lowes.com/pd_71093-70-DW1206_0__?productId=1209435&Ntt=3%2F32&pl=1&currentURL=%2Fpl__0__s%3FNtt%3D3%252F32 EDIT: I read audio's link and thats what is needed.

Your half way there!!!! Keep doing what your doing even after you save up and get it you will have money for everything else you want!

no problem I found link to pricing on the ones I posted through link above http://www.sonicelectronix.com/item_21099_EFX-Delta-D-Clamp-by-Scosche.html it takes two 0g connections.

what battery you working with?

These are aluminum terminal's that beallstar13 used in his build

The thing about my situation is that the ones I had were from knukonceptz and they would slip off the brass posts that come with my battery. the S3400 are made to SAE standard so they are tapered off towards the top of post, every time I go to tighten them they just slide off posts. I ended up just putting ring terminals on all my 1/0 and just used the screws that came with battery and a washer to hold everything down. I don't know if this company that has stuff for big three setup and 0 gauge wire but its worth a look. http://caraudiomag.com/articles/efx-delta-powerdistribution-accessories-review?utm_source=facebook&utm_medium=social&utm_campaign=efx-delta-powerdistribution-accessories-review

what kind of battery do you have? I had the one's from knukonceptz but they where doing the samething. I ended up just putting ring terminals on the 1/0 and using screws and washer directly into XSpower battery I have.

thats a good trick I will try that.

many hours later my hard drive needs a bath

huh theirs a chick there? I like bubble , but honestly I don't know I just saw avatars around of babes and found this

SHARING IS CARING!!!! Thanks wonderbread

To be safe ask someone from DC

Don't think it's Briana but too.

Laugh all you want Monte she will be mine!!!!! Blitz you say Briana, whats her last name